Lõppvõimendid

Eversolo AMP-F8 on suure jõudlusega Class AB lõppvõimendi, mis on loodud tipptasemel helisüsteemidele ja pakub võimast võimsust.

Stereo väljundvõimsus: 2 x 180 W RMS 8 oomi juures
Stereo väljundvõimsus: 2 x 280 W RMS 4 oomi juures
3 paari täpselt sobitatud kõrgevoolulisi MOSFET-transistore kanali kohta
Sisendid: Balanseeritud XLR ja balanseerimata RCA
Esipaneelil kaks analoog-VU-meetrit, mis jälgivad signaali taset esituse ajal

Lõppvõimendi Vincent SP-T700 jaoks välja töötatud täiesti uut tüüpi kombinatsioonvõimendi kasutab uuenduslikul viisil lampide ja transistoride vastavaid eeliseid, ühendades need ühtseks harmooniliseks tervikuks.

Frequency Response: 20 Hz – 20 kHz,
Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4,
Nominal Output Power RMS / 8 Ohm: 150 Watt,
Nominal Output Power RMS / 4 Ohm: 300 Watt,

Lõppvõimendi Vincent SP-332 sisendastmesse on lisatud kaks täiendavat 6N16 lampi, mis muudavad helisignaali soojemaks ja loomulikumaks. Ajatut disaini täiendavad osutitega VU-meetrid, mille taustvalgustuse värv on kasutaja poolt valitav.

Frequency Response: 20 Hz - 20 kHz, Tubes: 2 x 6N16,1 x 6N15
Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt,
Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt,
sisendid: 1 x Stereo RCA, 1 x Stereo XLR

Rohkem kui 1,1 kW väljundvõimsusega 8 oomi juures on monovõimendi Hegel H30A suutlikkust isegi keeruline mõõta. See massiivne seade mängib kerguse ja autoriteediga mistahes kõlareid maailmas, pakkudes parimat orkestrielamust.

Väljundvõimsus: 1100 W / 8 oomi, Dual Mono,
SoundEngine tehnoloogia,RCA- ja XLR-sisendid,
dempingfaktor more at 500, 56 bipolaarset transistorit

Mitmekülgne stereovõimendi Teac AP-505 põhineb TEAC-i häälestatud Hypex Ncore moodulil, mis on paigutatud kompaktsesse ja elegantsesse korpusesse.

Hypex Ncore võimendimoodul, häälestatud TEAC-i poolt
Maksimaalne võimsus 130 W + 130 W (BTL režiimis 250 W)
Stereo, Bi-Amp ja BTL/sildrežiimi tugi
Täielikult balanseeritud lülitus, passiivne jahutus
XLR balanseeritud ja RCA analoogsisendid

Lõppvõimendi Teac AP-701 on täielikult balanseeritud ehitusega dual mono võimendi, mis kasutab kahte spetsiaalselt valmistatud Hypex Ncore võimendimoodulit.

Kõrge väljundvõimsus: praktiline maksimaalne 260 W + 260 W (4 ohm)
Dual mono konstruktsioon tagab puhta signaali võimenduse
Kaks sõltumatut toroidtrafot vasaku ja parema kanali jaoks
Diskreetsed puhvervõimendid sisendastmes
Ventilaatorita disain mürataseme minimeerimiseks

The M-5000 embodies this spirit with time-honoured craftsmanship and market-leading innovation and serves as the epitome of high-fidelity audio reproduction.

200 W + 200 W (4 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven)
Meticulously designed, balanced signal transmission
Floating and balanced power amplifier layout for improved drivability
Low impedance design with shortened signal and power supply paths
Improved construction delivers state-of-the-art rigidity,Mas..

The Delta STEREO distills all of Class' innovation and knowledge into a compact high-performance stereo amplifier.In situations where dual mono amplifiers can't be accommodated, Delta STEREO offers uncompromizing performance in a single component.

250W per Channel total,Massive, high-quality power supply
Custom toroidal transformer,Custom-made Navcom feet to absorb vibrations
6-layer circuit boards provide for shortened signal
Furutech rhodium-plated RCA and torque-guard speak..

Delta MONO delivers the utmost clarity in everything you hear.Every detail communicates natural, authoritative sound.An expansive dynamic range with infinitesimal noise delivers unsurpassed fidelity to the musical source. Start listening.

300W per unit total,Massive, high-quality power supply
Custom toroidal transformer,Hand-laid circuit boards
6-layer circuit boards provide for shortened signal
Fully balanced output stage and balanced circuitry
22 4-pole Mundo..

The dual monoblock architecture is equipped with twin, custom engineered oversized, in-house manufactured 2,200 Volt Amp toroidal transformers in individual epoxy filled enclosures eliminating noise and vibration.

Balanced XLR inputs,Class AB linear power amplifier
500 watts of robust power x 2 at 8 ohms
800 watts x 2 at 4 ohms,Dual custom engineered toroidal transformers

Colossal power and breath taking performance. Never has an amplifier been so close to perfection, but at the same time the technology must be subordinate – and transparent – to the music.

Audio grade “switched mode” power supply (4 × 600 VA )
More than 1,000,000 µFarad storage capacity in the power supply unit
Peak current rating of more than 120 Ampere
Power output  600W at 8 ohms,1200W at 4 ohms
Inputs 1 × balanced (XLR),1 × unbalanced (RCA)

The new “switched mode” power supply technology brings the soulution 711 to new level of performance. Improvements on the test bench get confirmed by the performance in the listening room.

Audio grade “Switched Mode” power supply (4 × 600 VA )
More than 1,000,000 µFarad storage capacity in the power supply unit
Peak current rating of more than 120 Ampere
Power output 2 × 150W at 8 ohms,2 × 300W at 4 ohms
Inputs: 1 × balanced (XLR),1 × unbalanced (RCA)

The 511 is equipped with the same “switched-mode” power supply technology, optimized for audiophile applications, as our series7 products.

versatile: stereo-, mono- and dual-mode
Stereo-mode: 140 W @ 8 Ω, 280W @ 4 Ω, 560W @ 2 Ω per channel
Dual-mode: 140 W @ 8 Ω, 280W @ 4 Ω, 560W @ 2 Ω per channel
Mono-mode: 560 W @ 8 Ω, 1120 W @ 4 Ω, 2000 W @ 2 Ω

Cyrus Power XR power amplifier is a flagship stereo power amplifier in the XR range and is a perfect match for the XR Pre or indeed for any other Cyrus amplifier with a 'Pre Out' as an upgrade option.

Power Output - 2 x 144W into 4 Ω,Power Output - 2 x 110W into 6 Ω
Power Output - 2 x 87W into 8 Ω,Input impedance - 28kΩ

The Classic POWER is the latest power amplifier from Cyrus, designed for the new Classic series. The objective was to create a significant step up in performance from previous Classic amplifiers by using everything that we learnt when developing the fantastic XR Series.

Power Output - 2 x 110W into 6 Ω,Power Output - 2 x 87W into 8 Ω
Unbalanced (RCA) inputs (with daisy-chain out)
Balanced (XLR) inputs,12V trigger input
PSX-R2 upgrade connection,Firmware upgrade por..

Rotel engineered this amplifier to deliver nuanced sound in a stereo music system, but you can also use it to drive one pair of speakers in a multi-channel home theater system.

130 watts per channel into 8 ohms with 2 channels driven
4-ohm stable for use with a wide range of speakers
Class AB amplifier design,custom-made toroidal transformer
stereo balanced XLR and unbalanced RCA inputs

The Rotel RB-1582 MkII provides up to 200 watts per channel, and it's 4-ohm stable, so it's compatible with a wide array of speakers. It has a custom-designed toroidal transformer inside, regulated by high-quality, British-made capacitors.

4-ohm stable for use with a wide range of speakers
Class AB amplifier design,custom-made toroidal transformer
stereo balanced XLR and unbalanced RCA inputs
two pairs of 5-way binding post speaker connectors

It delivers plenty of power to "get loud," and offers exquisite control over the stop/start motion of speaker drivers, for dynamic realism and accuracy.

350 watts per channel into 8 ohms with 2 channels driven
4-ohm stable for use with a wide range of speakers
Class AB amplifier design,high-quality, British-made capacitors
stereo balanced XLR and unbalanced RCA inputs

Anthem STR Power kasutab klassikalist Class AB disaini ja käsitsi valitud transistore, et edastada kogu muusika täielik võimsus ja puhtus ilma moonutusteta.

Võimsus 400W kanali kohta 8 oomi ja 600W 4 oomi puhul.
Kaks massiivset toroidtrafot tagavad stabiilse ja müratavaba töö.
Advanced Load Monitoring tehnoloogia ja esipaneeli võimsusnäidikud.
Automaatne sisselülitus ja balansseeritud XLR ning RCA sisendid.

Fully discrete circuitry with high current toroid transformer.Bridging switch for stereo or mono operation.

90 watts x 2 into 8 Ω (all channels driven)
150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
Two pairs of speaker outputs with front panel A/B buttons
DC Servo and relay protection circuits

This power amplifier effortlessly delivers delicate audio signals from a preamplifier to loudspeakers with absolute transparency and finesse.

No Global Feedback Design,MOON Transistors
Dual Mono Configuration,Monaural Mode Toggle Switch
Output Power (Stereo 8 Ω): 200 W
Output Power (Mono 8 Ω): 600 W
Frequency Response: 2 Hz – 100 kHz

The 400M delivers finesse, detail and refinement that can challenge your perception of reality vs. recorded music.

Fully balanced differential circuitry.
Optimised selection of very high quality electronic components.
Output Power at 8Ω 400 W,Output Power at 4Ω 650 W
Frequency response 10Hz - 125kHz

Vocals and cymbals float in a musical space filled with the air and natural ambience of a musical performance.

Balanced differential circuitry.
Optimised selection of very high quality electronic components.
Output Power at 8Ω: 125 W per channel
Output Power at 4Ω: 250 W per channel
Frequency response: 10Hz - 125kHz

Updated rear panel with heavy duty speaker terminals from HINT 6

160 watts x 2 at 8 Ω ,240 watts x 2 at 4 Ω
Circuitry designed by legendary John Curl
Gold-plated RCA input loop output jacks
JFET input stage, MOSFET driver stage
Independent power supplies for input stage,driver stage and output stage

Five Channel Power Amplifier.Class A/AB circuitry designed by legendary John Curl.DC Servo and relay protection circuits

180 watts RMS x 5 at 8 Ω,255 watts RMS x 5 at 4 Ω
Balanced XLR inputs with discrete circuits
Heavy-duty 24k gold-plated, 5-way speaker terminals

Three-Channel Power Amplifier.Complementary MOSFET driver stage and JFET input stage

250 watts x 3 at 8 Ohms / 400 watts x 3 at 4 Ohms
Adjustable gain,Circuitry designed by legendary John Curl
Unbalanced RCA and balanced XLR inputs
DC Servo and relay protection circuits,THX Ultra2 certified
Heavy-duty 24k gold-plated 5-way speaker terminals

Koostöös Starke Sound meeskonnaga välja töötatud Eversolo AMP-F2 on tipptasemel D-klassi võimendi. Seade põhineb uuenduslikul NS600 moodulil, mis tagab puhta ja dünaamilise heli.

Väljundvõimsus on 280W kanali kohta (4 oomi) ja 130W kanali kohta (8 oomi)
Efektiivne D-klassi võimendustehnoloogia tagab suurepärase jõudluse
Balanseeritud 2-kanaliline XLR-sisend puhta signaali edastamiseks

Kui kasutate oma kaheahelalises (2-kanalilises) helisüsteemis suure võimsustarbega kõlareid, tagab Arcam PA PA240 neile kogu vajaliku energia

Võimsus: 225 W kanali kohta (8 oomi) või 380 W kanali kohta (4 oomi)
Tipptasemel Class G helivõimendus erakordse dünaamika ja puhtuse tagamiseks
Kolm töörežiimi: Stereo, Dual Mono või sillatud (Bridged) režiim
Lülitatavad RCA ja balanseeritud XLR sisendid
Ideaalne lahendus ka kõige nõudlikumate põrandakõlarite käitamiseks<..

Lõppvõimendi T+A A 200 jaoks on välja töötatud täiesti uus lülitustopoloogia, et saavutada optimaalne helikvaliteet, jõudlus ja tõhusus.

Nominaalne võimsus kanali kohta: 250 W (4 Ohms),
äärmiselt madal moonutustegur ja intermodulatsioonmoonutus,
erakordselt madal müratase, High damping factor,
puhas piiramine (clean clipping),täielikult lineaarne sagedusvahemik kuni 60 kHz

The amplification circuit of the 312 is based on the technology used in our Series 5 amplifiers.

Power output 120 W at 8 ohms,240 W at 8 ohms
Analog inputs 1 × balanced (XLR)
LINK (remote turn-on) 2 x phone jack (3.5mm)
Loudspeaker 2 pair loudspeaker binding posts

Võimendi Eversolo AMP-F10 edastab pillide peeneid tekstuure ja vokaali loomulikku ilu, luues elava esituse efekti.

Täiustatud alalisvoolu filtreerimisahel puhta Hi-Fi heli jaoks
Pidev väljundvõimsus on 200W (8 oomi) ja 320W (4 oomi)
Viis paari suure voolutugevusega MOSFET-transistore kanali kohta
Erakordne helikvaliteet ja pikaajaline töökindlus

Further features include two modified power supplies for increased performance, plus an additional auxiliary power rail for the front end, which provides extra voltage to drive the custom-made MOSFETs.

Trickle down ULTIMA tech,Dual feed-forward error correction
Fully balanced system,HF Switch mode power supply
Proprietary MOSFET, power 75W*2 into 8 ohms

Universaalne 4-kanaliline võimendi Arcam PA410 on loodud paindlikkust silmas pidades ning sobib suurepäraselt nii kvaliteetse muusikasüsteemi kui ka kodukino lahenduste jaoks.

Võimsus (8 oomi): 50 W kanali kohta (kõik 4 kanalit koormatud)
Võimsus (4 oomi): 70 W kanali kohta
Kõrge helipuhtuse ja madala moonutusega Class AB helivõimendus
Toroidaalne trafo (Toroidal transformer) tagab madala mürataseme ja suure voolutugevuse
Neli balanseerimata RCA eelvõimendi sise..

The outstanding performance of the QUAD 303 is still celebrated to this day, and is largely due to the unique output circuit developed by QUAD.

QUAD 303 Triples output stage,Dedicated 200VA toroid transformer
Stereo/Bridge mode switching,Inputs: 1 x Line, 1 x XLR
Rated power: Stereo: 2 x 70W at 4 ohms

Envelope yourself in a sonic landscape defined by its sure-footed,visceral sound, where smooth vocals and airy upper-end extension reign supreme

Power Output: 2 x 200 watts at 8 Ohms,2 x 350 watts at 4 Ohms
Frequency Response: 10Hz- 50KHz,Audio Input: 2 RCA, 2 XLR
Audio Output: 2 pairs of heavy-duty, gold-plated binding posts

The heart of this audiophile amplifier is a Class D module which is highly efficient and energy saving.

100 watts per channel into 8 ohms,140 watts into 4 ohms
stereo analog RCA input and output
12-volt trigger input and output for custom integration
vibration-resistant aluminum chassis

Our Monogrammed Heatsinks add visual appeal and will keep the MC830 running cool for optimum performance.

300 watts x 1 into 8 ohms ,480 watts x 1 at 4 ohms
industrial design featuring an open, polished stainless steel chassis
McIntosh Monogrammed Heatsinks add visual appeal
frequency response:10-100,000 Hz ,balanced XLR input,unbalanced RCA input

The CAD-120S MkII is a fully balanced stereo tube amplifier that masterfully blends power with precision for an unparalleled auditory experience.

Circuit Type: Class AB,push-pull amplifier
Ultralinear or Triode mode operation with a front panel selector switch
Power Output: Ultralinear - 120 watts per channel,Triode - 60 watts per channel
Inputs:XLR balanced or RCA single-ended,Frequency Response:17 Hz – 25 KHz