Amplifier output
Power amplifier output (at rated 230/120V supply voltage) 50W per channel into 8 Ohms
73W per channel into 6 Ohms
Note: Continued high level use into loads of 6 Ohms or less may cause the case to exceed 40°C above ambient temperature and activate the thermal shut down.
Headphone output No Load = 8V
300 Ohms = 5.9V
54 Ohms = 2.6V
32 Ohms = 1.8V
Source impedance = 109 Ohms
Distortion
THD+Noise (A-weighted)
Line inputs Typically 0.005% at 1kHz
Frequency response
Bandwidth (at 80W into 8 Ohms)
Phono input 15Hz (-3dB) to 40kHz (-3dB)
Line inputs 12Hz (-1dB) to 43kHz (-3dB)
RIAA accuracy Better than ±0.5dB 100Hz to 20kHz
Sensitivity
Input sensitivity (for 72W into 8 Ohms)
Phono input 2.1mV load 47k in parallel with 220pF
Line Inputs 2-4 210mV load 47k Ohms
Digital inputs
Input D1 S/PDIF Isolated 0.5V 75 Ohms Co-axial
Input D2 S/PDIF Optical Toslink
Supported sampling rates 32, 44.1, 48, 88.2, 96, 176.4, 192kHz
Supported bit depths 16 to 24 bit
THD+Noise Typically 0.005% at 1kHz
Dimensions and weight
Dimensions (W x H x D) 216 x 79 x 365mm (8.5 x 3.1 x 14.4in)
Weight 4.9kg (10.8lbs)
Power
Power supply AC supply 230V / 220V / 120V / 100V nominal ±10%
Power consumption 200W at 1dB below clip into 8 Ohms
Power consumption on standby 0.4W
Fuse ratings T2 AL 250V - 230V 50Hz / 220V 60Hz
T3.15 AL 250V - 120V 60Hz / 100V 50/60Hz
Remote batteries AAA (1.5V) x 2