Phono предусилители

The Fono MC MK4 is an exceptionally high quality MC phono stage designed to maximise the potential of any low output MC cartridge.

Dedicated moving coil phono stage,Simple connectivity and operation
Fully adjustable via DIP switches via rear panel,Two selectable gain settings
Default factory settings matched for all Rega MC models.

The consequent enhancement of our succesful tube phono preamplifier, the PHO-700, has now the possibility to make exact adjustments for the pick-up cartridge through DIP-switches.

Frequency Response: 10 Hz – 20 kHz,T.H.D.: <0.05% (20 Hz - 20 kHz)
Input impedance: MM: 47 kOhm, MC: 99 - 1000 Ohm (adjustable)
Inputs: 1 x Stereo RCA,Outputs: 1 x Stereo RCA, USB

With 30 years' experience designing state-of-the-art discrete transistor circuits, we have built a phono preamplifier like no other. It is neutral, dynamic, and exceptionally revealing.

MM and MC,Subsonic Filter,Balanced (XLR) output
Highly optimizable,Auto standby,Frequency Response: 2Hz - 20kHz
Ultra low noise discrete JFET transistor input stage for both MC and MM

The PP 2e Phono Preamplifier offers superb performance in a clean and simple package.

compatible with moving magnet and moving coil phono cartridges
signal-sensing auto power standby
high-efficiency external power supply for reduced noise
gold-plated input and output jacks for reliable

With the addition of the PP 4 to your home system, the LPs you cherish the most come alive in the form of expansive and rich sound.

built-in analog-to-digital converter to convert vinyl to digital files
compatible with moving magnet and moving coil phono cartridges
outputs 16-bit/48kHz PCM digital audio

The Fono MM MK5 phono stage has been designed to be effective, easy to use and above all, to reproduce music.

Dedicated Moving Magnet stage,Simple connectivity and operation
Custom case design,Two stage RIAA Equalization

One fully adjustable, dedicated moving coil and one moving magnet.Each stage is designed and engineered to maximise the potential of your vinyl system

High performance switchable MC & MM stage
Fully adjustable MC stage,Custom designed case
MM input uses low noise bipolar transistors
Bespoke input circuitry for MM & MC

The reference Aura MC stage is the culmination of decades of electronic design development. We have created the ultimate, fully adjustable, three-stage, all symmetrical pre-amplifier designed purely to extract the very best performance from your moving coil cartridge and vinyl playback system.

Three stage, all symmetrical pre-amplifier,Fully adjustable
Compatible with all typical low output moving coil cartridges

Phono-Preamplifier for connecting your turntable to a line input of your amplifier. The low-noise phono-preamp is suitable for MM and MC cartridges.

Frequency Response: 10 Hz – 20 kHz
Input Sensitivity MM: 58 mV, MC: 6,8 mV
Inputs: 1 x Stereo RCA,Outputs: 1 x Stereo RCA

Very complex is also the external power supply which minimizes all influences from outside.

Frequency Response: 10 Hz - 20 kHz
Input Sensitivity: MM: 58 mV, MC: 6,8 mV
Inputs: 1 x Stereo RCA,Outputs: 1 x Stereo RCA

A unsophisticated and low noise playback is the "job" of a good phono preamplifier.With the PHO-500 we managed this. T

you can make individual adjustments by DIP-switches on the PHO-500.
Frequency Response: 10 Hz – 20 kHz
Signal-to-Noise: MM: > 83 dB, MC: > 70 dB
Input Impedance: MM: 47 KOhm, MC: 100 Ohm - 1000 Ohm (adjustbale)

The PE-505 is a phono equalizing amplifier with dual monaural and fully-balanced input/output circuits that support balanced MC input.

Full differential inputs/outputs circuits
Individual EQ curves for monaural records and ones with EQ from DECCA and COLUMBIA
Balanced MC input,Switchable MC and MM impedance
Switchable MM/MC gain (High/Low),Subsonic detection

R15 MM/MC phono preamp is designed to amplify with honest fidelity the delicate signal from any cartridge it is paired with.

Moving coil and moving magnet phono stage
Adjustable gain and input settings,RCA output
Up to 65db MC and 45db MM gain

The PH-5 is the latest born at Gold Note’s range of phono stages, designed to deliver the same high quality and excellent performance.

Equalisation curve control,3 EQ curves
MM and MC compatibility,Input impedance 9 options
Gain 8 levels from 34dB to 66dB
XLR and stereo unbalanced RCA and balanced

PH–10 is an ultra-versatile phono preamplifier with unique features, including EQ curve, load and gain adjustment.

MM/MC two independent stereo RCA
Phono Pre-amplifier with SKC and TFT colour display
Equalization Curve control: 3 selectable curves
Frequency response: 2Hz – 200KHz
Line output: stereo RCA and balanced XLR 

Ultra-low distortion,Exclusive AC polarity switch to eliminate hum
Gold-plated RCA input and output jacks
RIAA curve accurate to 0.25 dB
Switchable gain for moving magnet or moving coil cartridges

The Thorens MM Flex is a high performance moving magnet phono preamplifier that can be fitted directly to the rear of your turntable by means of the unique Velcro™ strip. This allows it to be assembled to your turntable without any irreversible modification.

Mode Moving Magnet (MM) ,Gain at 1 kHz 39 dB
Cartridge matching ,(input impedance) 47 kOhms + 220 pF fixed
Frequency response 10 Hz - 50 kHz (-3 dB) ,RIAA curve accuracy ±0.2 dB max

all passive and active components have been selected for their quality.The capacitors that deal with the equalization of the RIAA curve are all low tolerance plastics capacitors.The versatility of use of the AAphono has also been particularly taken care of.

MM gain(@1KHz) 40dB,MC Gain(@1KHz) 65dB
Frequency response(+/-0.25dB) 10Hz – 20KHz
MM SNR 89dB,MC SNR 72dB

It's solidly built, and offers beautiful sound with moving magnet and moving coil cartridges. Balanced stereo XLR outputs allow you to make solid audiophile-grade connections to your audio system.

MM/MC moving coil and moving magnet
Gain adjustment up to 50db MM and 76db MC
fully isolated power supply reduces noise
unbalanced stereo RCA output,balanced stereo XLR output

Unbalanced circuit design ensures having as few components in the signal path as possible.Dual-mono layout with discrete left and right channels maximise audio purity and virtually eliminates crosstalk.

Inputs: 2 × MC unbalanced (RCA),1 × MM unbalanced (RCA)
Input impedance MC: 10 Ω – 1000 Ω
MM: 47 Ω – 47 kΩ and 0 – 750 pF
Outputs:1 × balanced (XLR),1 × unbalanced (RCA)

While the world of recorded music formats continues its seemingly inexorable change, with CDs and SACDs giving way to server-based storage,USB and network interfaces, one format – that of the vinyl record – continues to be highly popular.

configured for moving magnet or moving coil cartridges
Inputs 2 × RCA (MC/MM configurable)
Outputs 1 × balanced (XLR),1 × unbalanced (RCA)
LINK (remote turn-on) 12 V control signal

Designed to exceed the expectations of the most serious vinyl audiophiles, the purity of the tiny signal produced from the stylus is preserved throughout the amplification journey, through a deep understanding of circuit design and our relentless pursuit of perfection

configurable to match either moving coil or moving magnet cartridges.
MC inputs configurable for gain,XLR balanced and RCA outputs
Warp filter to reduce bass unit excursion
PSX-R2 port for the ultimat..

The Zphono XRM is Parasound’s latest phono preamplifier which combines high performance with unprecedented versatility

Dual inputs for two turntables (1 MM and 1 MC)
Front panel input select switch,Front panel rumble filter switch
Front panel mono/stereo mode switch
Balanced and unbalanced outputs

In a matter of just a few seconds, you can easily configure under the unit each of these four parameters: gain, curve, resistance and capacitance.

adjustable impedance/capacitance loading
adjustable gain settings for MM and MC cartridges
Four layer PCB tacings using pure copper for low impedance characteristics
Inductive DC Filtering for a significantly lower noise floor

Designed by John Curl - creator of the legendary Vendetta Research phono preamp

Inputs and outputs use Vampire brand 24k gold-plated RCA jacks
Balanced outputs use Neutrik brand premium XLR jacks
MM 47k ohm, MC 47k ohm or MC variable 50-550 Ohms
Triple shielding;low-carbon mild steel partitions isolate the power supplies

Its comprehensive range of gain and impedance-matching options ensures versatility, with convenient front-panel controls providing easy access to these adjustable features.

Supports both Moving Magnet and Moving Coil cartridges
Selectable impedance: 30Ω, 100Ω, 5kΩ, and 4.7pf
Selectable gain: 60dB, 65dB, and 70dB
Stereo unbalanced RCA outputs and XLR Outputs

Delivering the required gain for vinyl playback while remaining linear and phase-correct, is still a challenging task. The new 350 phono stage masters it with ease.

Two-Stage Design: Active/passive for RIAA equalization.
High-Quality Components: Ensures precise audio performance.
60 dB Gain: Three low noise amplifier stages for clear sound.
Stable Power Supply: Switched mode power supply for low noise.
Adjustable Impedance: Aligns perfectly with MC phono cartrid..

His beauty offers the warm, natural, expansive sound that vacuum tube preamps are famous for

two dual-triode ECC83 (12AX7A) vacuum tubes for optimal channel separation
compatible with moving magnet and moving coil phono cartridges
front-panel selectable amplifier gain (40, 43, 50, 53, 60 or 63dB)
gold-plated RCA stereo input and output pairs

Offers plenty of cartridge-loading flexibility for vinyl listeners who want to get the most out of their turntable.

compatible with moving magnet and moving coil phono cartridges
optimal channel separation and clarity,true balanced gain stage,subsonic filter
balanced XLR inputs and outputs,unbalanced stereo RCA input and output

Excellent build quality and very precise cartridge loading options are the hallmarks of this mighty fine phono preamp.

compatible with moving magnet and moving coil phono cartridges
switchable loading,capacitance settings,gain settings
subsonic filter,balanced XLR inputs and outputs
unbalanced stereo RCA input and output

The CS 329 uses sophisticated technology for entry-level analogue music playback

Elastomer vibration absorber integrated inside the feet
Removable dust cover,Tonearm: Straight, Plug and Play
Plug and Play: all adjustments are factory fixed
with AT91 Cartridge and phone preamp

High-performance phono preamplifier that brings true tube warmth and balanced connectivity to vinyl playback.

Balanced design:5-pin mini XLR balanced input and balanced XLR outputs
Fully discrete gain stage,Front-panel controls
Replaceable tube stage:Uses two ECC83 (12AX7) tubes
supports both MM and MC cartridges,Premium construction

The MC 1600 offers exceptional sound quality and flexible adjustment options for the most demanding analog enthusiasts.

XLR and RCA inputs and outputs,MM input impedance: 47 kOhm
MC input impedance: freely selectable between 20 and 1280 Ohm
Gain: adjustable from 32 dB to 68 dB in 10 fine steps
Capacitance adjustment: 50 to 600 pF,for optimal matching to the cartridge used

Compact yet powerful tube-based phono stage designed for vinyl lovers craving rich,authentic sound without clutter.

Suitable for MM and MC cartridges,2x ECC83 tubes (replaceable)
Precise RIAA equalisation in two parts, passive/active
Fully discreet circuit design without OpAmps,Front-sided Gain control
Ultra low noise circuitry with FET input stage

The AOS is a dedicated no compromise fully adjustable moving coil pre-amplifier using a circuit design based heavily on our award-winning Aura reference MC phono stage.

Dedicated moving coil phono stage,Fully adjustable for loading
Factory pre-set for use with all Rega MC cartridges
Circuit design based on the Reference Aura MC
Automatic standby function

This redesigned model has two-step signal amplification section, built based on the high quality opamp and two low-noise 12AU7 vacuum tubes.

Vacuum tube phono preamplifier MM/MC
AC Supply:Stabilized + toroidal Supreme Audio Grade transformer
Cadridge type:MM/MC HO/MC,inputs/Outputs: 2/1
Vacuum tubes : 2x 12AU7 / ECC82,Subsonic filter