Ламповые усилители

The SV-237 MKII appears more modern and elegant than its predecessors. Modern now also with the connection possibilities.

Frequency Response: 20 Hz - 20 kHz,Tubes: 1 x 12AX7; 2 x 6N1P
Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt
Inputs: 3 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth.

Using a new technologies a new business development and Luigi Lorenzon's constant pursuit of perfection, he succeded in creating an entry level amplifier that is able to satisfy even the most dedicated audiophile.

provides a minimum of 12 Watts per channel, power output from a pair of EL84's in Ultra-Linear
USB,DAC on board 24bit , Phono stage for MM cartridges.
SPDIF inputs (Coax and Optical) Built around a AKM chip.
Binding posts,All tubes used are selected after..

The McIntosh MA252 looks like something you'd find in an art gallery, with its four vacuum tubes confined in metal cages, an illuminated glass panel, and a stylized heat sink

100 watts x 2 channels into 8 ohms ,160 watts x 2 channels into 4 ohms
frequency response: 10 - 100,000 Hz,1 mono subwoofer RCA output
Hybrid Drive technology combines a vacuum tube preamp section
two 12AX7a and two 12AT7 vacuum tubes
McIntosh Monogrammed Heatsinks

The MA352 includes our Hybrid Drive technology that uses the best of vacuum tubes and solid state to produce the best sound performance.

Power Output per Channel: 200 Watts into 8 Ohms; 320 Watts into 4 Ohms
pair of 12AX7A and a pair of 12AT7 vacuum tubes
Patented Power Guard technology ,McIntosh Monogrammed Heatsinks
High Drive headphone amplifier, 5-band analog tone control 

To get the best sound quality of your headphones, an external headphone amplifier is needed. 
In It was designed that almost every headphone could be driven with the best sound quality.

Frequency Response: 20 Hz - 20 kHz ,Signal-Noise Ratio: > 95 dB
Tubes: 2 x E180F/6SCH9P, 1 x ECC82

The SV-228 is the consistent further development of one of ours successful amplifiers series in the Power Line. In a complete new design, with a VU meter embedded in the front panel.

Nominal Output Power RMS / 8 Ohm: 2 x 100 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 180 Watt
Tubes: 1 x 6N4, 2 x ECC82
Inputs: 2 x Stereo RCA, 1 x Coaxial, 1 x Optical, 1 x Bluetooth

A completely new combination amplifier was developed for the SP-T700, exploiting the respective advantages of tubes and transistors in an innovative manner, combining them to create a harmonious whole.

Frequency Response: 20 Hz – 20 kHz,Inputs: 1 x Mono RCA
Nominal Output Power RMS / 8 Ohm: 150 Watt
Nominal Output Power RMS / 4 Ohm: 300 Watt
Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4

Two additional 6N16 tubes were added to the input section to make the sound signal more warm dn natural. The VU-meters with user selectable colored backlighting complete the timeless design.

Frequency Response: 20 Hz - 20 kHz,Tubes: 2 x 6N16, 1 x 6N15
Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt
Inputs: 1 x Stereo RCA, 1 x Stereo XLR

After several successful years, we have revised our reference preamplifier.

Frequency Response: 10Hz – 100kHz
Inputs: 6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
Tubes: 4 x 6SCH9P, 4 x 6SCH51P, 1 x 85A2

Our new flagship of the integrated amplifiers. The preamp section was completely new developed and benefits a lot of the SA-T7. Through the build-in Wifi modul the amplifier music streaming could be done and it could be integrated in your home network.

Frequency Response: 20 Hz - 20 kHz
Nominal Output Power RMS / 8 Ohm: 2 x 180 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 300 Watt
Tubes: 2 x 6N1P, 2 x 6N2P, 1 x 85A2

We decided on a consistent symmetrical design to minimize crossfeed and achieve a better distortion factor. In the pre-amp, 3 tubes per side work with the Shunt Regulatet Push-Pull concept to process the souond signals.

Frequency response: 20 Hz – 20 kHz,Input sensitivity: 350 mV
Nominal output power RMS / 8 Ohm: 2 x 100 Watt, RMS / 4 Ohm: 2 x 160 Watt
Inputs: 3 x stereo RCA, 1 x stereo XLR, 1 x optical, 1 x coaxial
Tubes: 1 x 6Z4, 2 x 12AX7, 4 x 12AU7

With the SA-T7 Diamond we have created a very special edition of our reference preamplifier, the SA-T7 MK. The heart of the preamplifier was equipped with original Telefunken tubes from German production.

Frequency Response: 10Hz – 100kHz +/- 0,1 dB
Inputs: 6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
Tubes: 4 x Telefunken PCF 803, 1 x 85A2

For over a decade, the SLI-80 has reigned supreme as the ultimate choice for discerning audiophiles seeking a vacuum tube-integrated amplifier blending power and aesthetics.

Push-Pull Ultra-Linear Amplification Pure Class AB1
Power Output: 80 watts/channel- Ultra-Linear
Frequency Response: 19Hz to 23KHz
Output Taps: 8 Ohms, 4 Ohms
Inputs: 3 Pairs Single-ended RCA,Output for Subwoofer

The capability to optimally mate the amplifier to any loudspeaker regardless of its design principle

Power Output 2 x 110 W continuous, 130 W Peak into 4 Ohm
Frequency Response 20 Hz - 70 kHz,Bias Adjustment
Inputs: 5 x Line Level RCA, 1 x XLR Input
Octave Dynamic Technologies,Tube Complement: 4 x KT120

The V 70 SE plays Rock-and-Roll like Rock-and- Roll and celebrates Classical music with delicate grace and solid expanse. Listening to music becomes an absolute pleasure.

Power Output 2 x 70 Watt into 4 Ohms ,Frequency Response 20 Hz - 70 kHz
Inputs: 4 x Line Level Cinch (1x optional Phono),1 x XLR Input
Tube Configuration 4 x 6550 JJ,Bias Adjustment, Power Management.

Crafted to harness KT-150 output tubes,it elevates your audio with exceptional bass and rich harmonics.

Circuit Type Push-Pull Ultra-linear Amplification in Pure Class AB1
Power Output 100 watts/channel,4* KT150 Output Tubes
Frequency Response 19Hz to 23Khz,Inputs 4 Pairs Single-ended RCA
Outputs:1 Pair RCA for Subwoofer,Headphone out

The V 70 Class A is Octave’s newest integrated amp by designer Andreas Hofmann

Power Output 2 x 50 W continuous, 70 W Peak into 4 Ohm
Frequency Response 20 Hz - 70 kHz,Bias Adjustment
Inputs: 5 x Line Level RCA, 1 x XLR Input,1 x Phono optional / RCA
Octave Dynamic Technologies,Tube Complement: 4 x KT 88-S4A-Carbon

For over 20 years, Cary Audio has been providing exceptional preamplifiers,and their latest offering, the SLP-98,continues to deliver unparalleled musical enjoyment.

Circuit Type: Class A Triode,Warm-Up Time: 3 Minutes
Frequency Response: 5 Hz to 163,000 Hz
Tubes: 4 ea – 6SN7 Line Stage,2 ea – 12AX7 Phono Stage
2 ea – 12AU7 Phono buffer
offer an optional built-in phono stage designed for MM cartridges.

The CAD-120S MkII is a fully balanced stereo tube amplifier that masterfully blends power with precision for an unparalleled auditory experience.

Circuit Type: Class AB,push-pull amplifier
Ultralinear or Triode mode operation with a front panel selector switch
Power Output: Ultralinear - 120 watts per channel,Triode - 60 watts per channel
Inputs:XLR balanced or RCA single-ended,Frequency Response:17 Hz – 25 KHz

The SV-500 MK presents itself in a timeless design and with the typical Vincent sound character.

Bluetooth streaming,HDMI port (ARC) included,Tubes: 1 x 12AX7, 2 x 6N
Nominal Output Power RMS/8 Ohm: 2 x 50 Watt,4 Ohm: 2 x 80 Watt
Inputs: 2 x Stereo RCA, 1 x Optical, 1 x Coax,Playable Digital Formats

Our aim was to offer an audiophile integrated amplifier acclaimed for its musicality and liveliness.it combines an ECC81/12AT7 tube preamplifier

ECC81/12AT7 tube pre-amplification
2x 130W at 8 ohms, Class AB amplification
6x analogue RCA inputs (including MM phono) + XLR input
2x HDMI (1x ARC), 3x Optical, 1x Coaxial,2x subwoofer out

The unprecedented PSE structure operating in class A was built using the highest quality toroidal transformers, designed especially for this amplifier.

Stereo vacuum tube amplifier,Max. output power: 2x15W
PSE parallel single ended,Output impedance: 4Ω/8Ω
Inputs: 3xRCA,Frequency response:12Hz-60kHz
Tubes:4x 300B, 2x 6sn7, 1x 12AX7, autobias.

Improved driver stage and carefully selected components deliver a more dynamic, transparent and refined sound.

Max. output power: 60 W,Circuit type: AB
Output impedance:,4Ω / 8Ω,Inputs:3x RCA + 1x DIRECT
Frequency response:16 Hz – 120 kHz,Tubes:4x KT88+ 3x 12AX7

In the new RE 320,Octave’s SE technology has been effectively implemented into a most astonishing compact stereo power amplifier – with resounding success!

Power Output 2 x 130 W,Inputs: RCA + XLR selectable
Frequency Response 25 Hz - 85 kHz,Bias Adjustment
Tube configuration 4 x KT 88-S4A-Carbon
Bias control Quiescent current display and setting
Protection system Soft start; Protection circuit for amplifier and power tubes