Analogue section
Frequency response + 0 / − 3 dB: D0,1 Hz – 200 kHz
Signal / noise ratio: 110/114 dB
THD  /  Intermodulation:  0,001 % /  0,001 %
Channel separation:  108 dB
Class A operation: up to 700 mA
Loudness: switchable, adjustable on the speaker efficiency
Sound control: switchable, channel separated. Bass and treble -6 dB to + 8 dB
Headphone outputs: 6.3 mm plug, 4.4 mm Pentaconn, XLR-4 pin
Impedances: 8, 12, 18, 25, 40, 80 Ohms
Analogue inputs
High level (RCA) / balanced (XLR): 250 mVeff ... 4,5 Veff / 10 kOhms | 500 mVeff ... 9 Veff / 20 kOhms
Channel separation: 110 dB
Digital inputs
1 x AES-EBU 32...192 kHz / 16-24 Bit
S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz / 16-24 Bit,
1 x BNC 32...192 kHz / 16-24 Bit,
2 x USB DAC: Device-Mode 44,1 ... 768 kSps (PCM) and up to DSD1024*, supports asynchronous data transfer.
*DSD 512 and DSD 1024 with Windows PC and appropriate driver installed or Linux PC with Kernel 4.4 or higher only. Supports DoP up to DSD 256 (0x05/0xFA Marker).

2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)

Bluetooth: A2DP (Audio), AVRCP 1.4 (Control) / aptX® HD , SBC, AAC
D/A converter section
PCM: Double-Differential-Quadruple-Converter with four 32-Bit Sigma-Delta D/A converter per channel 705,6 / 768 kSps conversion rate
DSD: T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native bitstream
Upsampling: T+A signal-processor – synchronous upsampling with four selectable oversampling algorithms. FIR short, FIR long, Bezier/IIR, Bezier, NOS (non-oversampling))
Analogue filter: Phase-linear Bessel filter 3rd order, switchable with 60 or 120 kHz cut of frequency
Mains / Accessories / Dimensions
Mains: 100 – 120 V or 200 – 240 V, 50 – 60 Hz, 100 Watts
Standby: 0,5 Watts
Dimensions (H × W× D): 10 × 32 × 34 cm
Accessories: Remotecontrol FM8, power cord, USB-cabel for charging RC,
USB cabel 2.0 for DAC, RCA cabel