Analog Audio Input/Line Out
THD (20 Hz – 20 kHz) - <0.003 % at
2V out
Signal-to-Noise Ratio - >110 dB (IHF; 20 Hz – 20 kHz, ref. 2V
out)
Channel separation - >90 dB (1 kHz), >75 dB (10
kHz)
Input impedance (R and C) -
Single-ended: 33 kOhms + 220
pF
Balanced: 10 kOhms +20 pF
Maximum input signal - >7.0 Vrms (ref. 0.1
% THD)
Output impedance - 440 hms
Frequency response - ±0.1 dB (20
Hz - 20 kHz)
Maximum voltage output -IHF load - >7.0 V (ref. 0.1 %
THD)
Analog Audio Input/Speaker Out
Continuous output power into 8
Ohms and 4 ohms(Stereo mode) - 80 W (ref. 20 Hz-20 kHz at rated THD, both
channels driven)
Continuous output power into 8 Ohms (Bridge mode) - 300
W (ref. 20 Hz – 20 kHz at THD 0.03%)
THD (20 Hz – 20 kHz) - <0.03 %
(250 mW to 80 W, 8 Ohms and 4 Ohms)
Signal-to-Noise Ratio - >98 dB
(A-weighted, 500 mV input, ref. 1 W out in 8 Ohms)
Clipping power (Stereo
mode, at 1 kHz 0.1 % THD) - >95 W
Clipping power (Bridge mode, at 1
kHz 0.1 % THD) - >315 W
IHF dynamic power (Stereo mode, at 1 kHz 1 %
THD) -
8 Ohms: 120 W
4 Ohms: 200 W
2 Ohms: 250 W
IHF dynamic
power (Bridge mode, at 1 kHz 1 % THD) -
8 Ohms: 500 W
4 Ohms: 560
W
Peak output current - >20 A (in 1 ohm, 1 ms)
Damping factor -
>100 (ref. 8 ohms 20 Hz - 20 kHz)
Frequency response - ±0.3 dB (20 Hz
- 20 kHz)
Channel separation -
>80 dB (1 kHz)
>70 dB (10
kHz)
Input sensitivity (for 80 W in 8 Ohms)
Fixed Gain mode: 920
mV
Bridge Mode Gain
Line In – Balanced and Single-ended
Fixed
Gain mode: 25 dB
Variable Gain mode: 14.5 dB – 34.5 dB
Bridge Mode
Sensitivity
Line In – Balanced and Single-ended
Fixed Gain mode:
2.8 V for 300 W in 8 Ohms
Variable Gain mode at maximum: 940 mV for 300 W in
8 Ohms
Bridge Mode Gain, C 268 and C 368 (RHC Pre Out C 368 driving LHC Line
Input C 268)
Fixed Gain mode: 43 dB at maximum volume C 368
Bridge
Mode Sensitivity (same configuration as above) - 350 mV for 300 W
Standby
power - <0.5 W
DIMENSION AND WEIGHT
Gross dimensions (W x H x D) 435 x
100 x 390 mm (17 1/8 x 3 15/16 x 15 3/8 inches)
Net weight 7.3 kg (16.1
lbs)
Shipping weight 8.7 kg (19.2 lbs)
NAD C 268 lõppvõimendi
- Mudel: C 268
Analog Audio Input/Line Out
THD (20 Hz – 20 kHz) - <0.003 % at
2V out
Signal-to-Noise Ratio - >110 dB (IHF; 20 Hz – 20 kHz, ref. 2V
out)
Channel separation - >90 dB (1 kHz), >75 dB (10
kHz)
Input impedance (R and C) -
Single-ended: 33 kOhms + 220
pF
Balanced: 10 kOhms +20 pF
Maximum input signal - >7.0 Vrms (ref. 0.1
% THD)
Output impedance - 440 hms
Frequency response - ±0.1 dB (20
Hz - 20 kHz)
Maximum voltage output -IHF load - >7.0 V (ref. 0.1 %
THD)
Analog Audio Input/Speaker Out
Continuous output power into 8
Ohms and 4 ohms(Stereo mode) - 80 W (ref. 20 Hz-20 kHz at rated THD, both
channels driven)
Continuous output power into 8 Ohms (Bridge mode) - 300
W (ref. 20 Hz – 20 kHz at THD 0.03%)
THD (20 Hz – 20 kHz) - <0.03 %
(250 mW to 80 W, 8 Ohms and 4 Ohms)
Signal-to-Noise Ratio - >98 dB
(A-weighted, 500 mV input, ref. 1 W out in 8 Ohms)
Clipping power (Stereo
mode, at 1 kHz 0.1 % THD) - >95 W
Clipping power (Bridge mode, at 1
kHz 0.1 % THD) - >315 W
IHF dynamic power (Stereo mode, at 1 kHz 1 %
THD) -
8 Ohms: 120 W
4 Ohms: 200 W
2 Ohms: 250 W
IHF dynamic
power (Bridge mode, at 1 kHz 1 % THD) -
8 Ohms: 500 W
4 Ohms: 560
W
Peak output current - >20 A (in 1 ohm, 1 ms)
Damping factor -
>100 (ref. 8 ohms 20 Hz - 20 kHz)
Frequency response - ±0.3 dB (20 Hz
- 20 kHz)
Channel separation -
>80 dB (1 kHz)
>70 dB (10
kHz)
Input sensitivity (for 80 W in 8 Ohms)
Fixed Gain mode: 920
mV
Bridge Mode Gain
Line In – Balanced and Single-ended
Fixed
Gain mode: 25 dB
Variable Gain mode: 14.5 dB – 34.5 dB
Bridge Mode
Sensitivity
Line In – Balanced and Single-ended
Fixed Gain mode:
2.8 V for 300 W in 8 Ohms
Variable Gain mode at maximum: 940 mV for 300 W in
8 Ohms
Bridge Mode Gain, C 268 and C 368 (RHC Pre Out C 368 driving LHC Line
Input C 268)
Fixed Gain mode: 43 dB at maximum volume C 368
Bridge
Mode Sensitivity (same configuration as above) - 350 mV for 300 W
Standby
power - <0.5 W
DIMENSION AND WEIGHT
Gross dimensions (W x H x D) 435 x
100 x 390 mm (17 1/8 x 3 15/16 x 15 3/8 inches)
Net weight 7.3 kg (16.1
lbs)
Shipping weight 8.7 kg (19.2 lbs)
- Kaubamärk: NAD
- Saadavus: Laos
Designed for multiple stereo setups, the C 268 can be used in a variety of
scenarios, including traditional stacks with a preamplifier or for bi-amping
your favourite loudspeakers.
80W x 2 Continuous Power into 8 or 4
Ohms,Stereo Dynamic Power 120/200/250---8/4/2 Ohms
Balanced Line
Inputs,Single-Ended Line Inputs.Variable Input Level Control
Line Output for
Daisy Chaining.12V Trigger In/Out.Auto Turn-on with Selectable Threshold