Lampvõimendid

The SV-237 MKII appears more modern and elegant than its predecessors. Modern now also with the connection possibilities.

Frequency Response: 20 Hz - 20 kHz,Tubes: 1 x 12AX7; 2 x 6N1P
Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt
Inputs: 3 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth.

Using a new technologies a new business development and Luigi Lorenzon's constant pursuit of perfection, he succeded in creating an entry level amplifier that is able to satisfy even the most dedicated audiophile.

provides a minimum of 12 Watts per channel, power output from a pair of EL84's in Ultra-Linear
USB,DAC on board 24bit , Phono stage for MM cartridges.
SPDIF inputs (Coax and Optical) Built around a AKM chip.
Binding posts,All tubes used are selected after..

The McIntosh MA252 looks like something you'd find in an art gallery, with its four vacuum tubes confined in metal cages, an illuminated glass panel, and a stylized heat sink

100 watts x 2 channels into 8 ohms ,160 watts x 2 channels into 4 ohms
frequency response: 10 - 100,000 Hz,1 mono subwoofer RCA output
Hybrid Drive technology combines a vacuum tube preamp section
two 12AX7a and two 12AT7 vacuum tubes
McIntosh Monogrammed Heatsinks

The MA352 includes our Hybrid Drive technology that uses the best of vacuum tubes and solid state to produce the best sound performance.

Power Output per Channel: 200 Watts into 8 Ohms; 320 Watts into 4 Ohms
pair of 12AX7A and a pair of 12AT7 vacuum tubes
Patented Power Guard technology ,McIntosh Monogrammed Heatsinks
High Drive headphone amplifier, 5-band analog tone control 

To get the best sound quality of your headphones, an external headphone amplifier is needed. 
In It was designed that almost every headphone could be driven with the best sound quality.

Frequency Response: 20 Hz - 20 kHz ,Signal-Noise Ratio: > 95 dB
Tubes: 2 x E180F/6SCH9P, 1 x ECC82

The SV-228 is the consistent further development of one of ours successful amplifiers series in the Power Line. In a complete new design, with a VU meter embedded in the front panel.

Nominal Output Power RMS / 8 Ohm: 2 x 100 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 180 Watt
Tubes: 1 x 6N4, 2 x ECC82
Inputs: 2 x Stereo RCA, 1 x Coaxial, 1 x Optical, 1 x Bluetooth

A completely new combination amplifier was developed for the SP-T700, exploiting the respective advantages of tubes and transistors in an innovative manner, combining them to create a harmonious whole.

Frequency Response: 20 Hz – 20 kHz,Inputs: 1 x Mono RCA
Nominal Output Power RMS / 8 Ohm: 150 Watt
Nominal Output Power RMS / 4 Ohm: 300 Watt
Tubes: 1 x 6S3P-EV; 1 x 6SCH9P, 1 x 6Z4

Two additional 6N16 tubes were added to the input section to make the sound signal more warm dn natural. The VU-meters with user selectable colored backlighting complete the timeless design.

Frequency Response: 20 Hz - 20 kHz,Tubes: 2 x 6N16, 1 x 6N15
Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt
Inputs: 1 x Stereo RCA, 1 x Stereo XLR

After several successful years, we have revised our reference preamplifier.

Frequency Response: 10Hz – 100kHz
Inputs: 6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
Tubes: 4 x 6SCH9P, 4 x 6SCH51P, 1 x 85A2

Our new flagship of the integrated amplifiers. The preamp section was completely new developed and benefits a lot of the SA-T7. Through the build-in Wifi modul the amplifier music streaming could be done and it could be integrated in your home network.

Frequency Response: 20 Hz - 20 kHz
Nominal Output Power RMS / 8 Ohm: 2 x 180 Watt
Nominal Output Power RMS / 4 Ohm: 2 x 300 Watt
Tubes: 2 x 6N1P, 2 x 6N2P, 1 x 85A2

We decided on a consistent symmetrical design to minimize crossfeed and achieve a better distortion factor. In the pre-amp, 3 tubes per side work with the Shunt Regulatet Push-Pull concept to process the souond signals.

Frequency response: 20 Hz – 20 kHz,Input sensitivity: 350 mV
Nominal output power RMS / 8 Ohm: 2 x 100 Watt, RMS / 4 Ohm: 2 x 160 Watt
Inputs: 3 x stereo RCA, 1 x stereo XLR, 1 x optical, 1 x coaxial
Tubes: 1 x 6Z4, 2 x 12AX7, 4 x 12AU7

With the SA-T7 Diamond we have created a very special edition of our reference preamplifier, the SA-T7 MK. The heart of the preamplifier was equipped with original Telefunken tubes from German production.

Frequency Response: 10Hz – 100kHz +/- 0,1 dB
Inputs: 6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
Tubes: 4 x Telefunken PCF 803, 1 x 85A2