Power Output - (RMS power, 20 Hz - 20 kHz)
All Channels Driven
90 watts x
2, 8Ω
150 watts x 2, 4Ω
150 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono
200 watts x 1, 8Ω
200 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity
20 amps peak per channel Frequency Response
20 Hz - 50
kHz, +0/-3 dB, 1 watt Dynamic Headroom - 1.3 dB Total Harmonic
Distortion
0.35% at full rated output
0.025% at average listening levels
IM Distortion - 0.05 % Transient IM Distortion - Not measurable S/N Ratio
110
dB at rated output, IHF A-weighted
103 dB at rated output, unweighted
93
dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
Input Impedance - 33 k Ω Input Sensitivity
800 mV for full rated output
(28dB) Inter-Channel Crosstalk
80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
Damping Factor - Over 150 at 20Hz 12V Trigger Turn On - DC 9 - 12V, 15 mA Audio
Turn On
Quieter: 1 mV
Louder: 6 mV AC Power Requirement
110 - 120 V /
220 -240 V, 50 - 60 Hz
0.5 watts standby
25 watts Idle (no audio)
350
watts full output Dimensions
17-1/4" Wide
16" Deep, with cables
connected
2-1/2" High with feet, 1-3/4" panel only (1U)
(437 x 406 x 63mm,
44.1 mm panel only) Net Weight - 20 lbs (9.1 kg)
Parasound NewClassic 275 v.2 lõppvõimendi
- Mudel: NewClassic 275 v.2
Power Output - (RMS power, 20 Hz - 20 kHz)
All Channels Driven
90 watts x
2, 8Ω
150 watts x 2, 4Ω
150 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono
200 watts x 1, 8Ω
200 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity
20 amps peak per channel Frequency Response
20 Hz - 50
kHz, +0/-3 dB, 1 watt Dynamic Headroom - 1.3 dB Total Harmonic
Distortion
0.35% at full rated output
0.025% at average listening levels
IM Distortion - 0.05 % Transient IM Distortion - Not measurable S/N Ratio
110
dB at rated output, IHF A-weighted
103 dB at rated output, unweighted
93
dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
Input Impedance - 33 k Ω Input Sensitivity
800 mV for full rated output
(28dB) Inter-Channel Crosstalk
80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
Damping Factor - Over 150 at 20Hz 12V Trigger Turn On - DC 9 - 12V, 15 mA Audio
Turn On
Quieter: 1 mV
Louder: 6 mV AC Power Requirement
110 - 120 V /
220 -240 V, 50 - 60 Hz
0.5 watts standby
25 watts Idle (no audio)
350
watts full output Dimensions
17-1/4" Wide
16" Deep, with cables
connected
2-1/2" High with feet, 1-3/4" panel only (1U)
(437 x 406 x 63mm,
44.1 mm panel only) Net Weight - 20 lbs (9.1 kg)
- Kaubamärk: Parasound
- Saadavus: Laos
Fully discrete circuitry with high current toroid transformer.Bridging switch
for stereo or mono operation.
90 watts x 2 into 8 Ω (all channels
driven)
150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
Two pairs of
speaker outputs with front panel A/B buttons
DC Servo and relay protection
circuits