Specification
Power outputs at rated 230/115 V supply voltage:
125 W RMS both channels driven into the rated load of 8 O
156 W RMS both channels driven into 6 O
Note: Continued high level use into 6 O may cause the case to exceed 40 °C above the ambient temperature and activate the thermal shutdown.

Headphone output:
No load 12.5 V
32 O 2.7 V
54 O 4 V
300 O 9 V
Source impedance 109 O

Record output:
Record output level (with rated input levels) 219 mV
Record output impedance 560 O

Pre-amp output:
Pre-amp output level (with rated input levels) 840 mV
Pre-amp output impedance 100 O

Input sensitivities for rated output level:
Input 1-5 and record input sensitivity 224 mV @ 17 kO
Maximum input level 11.5 V (record output amplifier overload point)
Direct input sensitivity 840 mV @ 50 kO
Power amplifier gain 31.6 dB

Frequency response @ 100 W into 8 O:
Line input 1-5 and record 10 Hz (-0.8 dB point) to 30 kHz (-0.5 dB point)
Direct input 10 Hz (-0.8 dB point) to 50 kHz (-0.5 dB point)

THD+Noise @ 100 W into 8 O:
Direct input (Power amplifier only) Typically 0.007% @ 1kHz (measurement bandwidth 22 Hz to 30 kHz)
Line input Typically 0.007% @ 1kHz (measurement bandwidth 22Hz to 30KHz)

Power consumption Maximum output: 415 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 124 W RMS into 8 O

Fuse ratings T3.15 AL 250 V - 230 V/ 50 Hz and 220 V / 60 Hz T6.3 AL 250 V - 115 V / 60 Hz and 100 V 50/60 Hz

Dimensions W 433 mm x H 95 mm x D 360 mm (including speaker terminals)

Weight 17.5 kg