Solid Long-Grain Copper Conductors :
Strand interaction is the single
greatest cause of distortion in a cable. Semi-Solid Concentric Packed Conductors
avoid many strand-interaction distortion mechanisms. Solid-core conductors offer
a complete and compelling solution to this problem.
Conductor metal
quality is critical for the best cable performance. The conductor surface is the
only area of the conductor with 100% current density at all frequencies. The
smoothness of the conductor surface is imperative because the surface is a guide
rail for the entire energy envelope. The best copper and silver conductor metals
have fewer grain boundaries and low oxygen content for low distortion and high
performance.
Solid conductors eliminate strand-interaction distortion.
Evergreen's solid Long-Grain Copper allows a smoother and clearer sound than
cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a
general metal industry specification regarding “loss” without any concern for
distortion. LGC has fewer oxides within the conducting material, less
impurities, less grain boundaries, and definitively better
performance.
Foamed-Polyethylene Insulation :
Insulation is necessary
to keep the positive and negative conductors separate and to give stability to
cable geometry. Insulation is also a "dielectric" because it is inside the
conductor's magnetic field. Dielectrics absorb energy, which after a delay is
then released in the signal, causing smearing and distortion. Better insulation
reduces distortion by absorbing less energy.
Evergreen uses air-filled
Foamed-Polyethylene Insulation on both conductors because air absorbs next to no
energy and Polyethylene is low-loss and has a benign distortion profile. Thanks
to all the air in Foamed-PE, it causes much less of the out-of-focus effect
common to other materials.
Metal-Layer Noise-Dissipation System (NDS)
:
100% shield coverage is easy. Preventing captured RF Interference from
modulating the equipment’s ground reference requires AQ’s Noise-Dissipation
System. Noise-Dissipation System prevents a significant amount of RFI from
reaching the equipment’s ground plane.
AudioQuest’s Noise-Dissipation
System (NDS) offers a compelling solution to this challenge by using metal-only
or alternating layers of metal and carbon-loaded synthetics to effectively
“shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy
before it reaches the layer attached to the ground.
The Evergreen
ultilises the Metal-Layer Noise-Dissipation System (NDS) to prevent most RFI
from reaching the equipment’s ground plane.
Double-Balanced Asymetrical
Geometry :
Geometry is the physical relationship of the conductors to one
another within a cable and determines a cable’s most basic electrical values
(capacitance and inductance). Different cable applications have
different/specialized geometry requirements, and so these applications do not
merely follow a ‘one size fits all’ approach. Better geometry leads to lower
levels of distortion.
Purpose designed for single-ended applications,
Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the
ground for a richer, and more dynamic experience. While many single-ended cable
designs use a single path for both the ground and the shield, Double-Balanced
designs separate the two for cleaner, quieter performance.
Cold-Welded
Gold-Plated RCA Plugs
AudioQuest Evergreen RCA kaabel
- Mudel: Evergreen
Solid Long-Grain Copper Conductors :
Strand interaction is the single
greatest cause of distortion in a cable. Semi-Solid Concentric Packed Conductors
avoid many strand-interaction distortion mechanisms. Solid-core conductors offer
a complete and compelling solution to this problem.
Conductor metal
quality is critical for the best cable performance. The conductor surface is the
only area of the conductor with 100% current density at all frequencies. The
smoothness of the conductor surface is imperative because the surface is a guide
rail for the entire energy envelope. The best copper and silver conductor metals
have fewer grain boundaries and low oxygen content for low distortion and high
performance.
Solid conductors eliminate strand-interaction distortion.
Evergreen's solid Long-Grain Copper allows a smoother and clearer sound than
cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a
general metal industry specification regarding “loss” without any concern for
distortion. LGC has fewer oxides within the conducting material, less
impurities, less grain boundaries, and definitively better
performance.
Foamed-Polyethylene Insulation :
Insulation is necessary
to keep the positive and negative conductors separate and to give stability to
cable geometry. Insulation is also a "dielectric" because it is inside the
conductor's magnetic field. Dielectrics absorb energy, which after a delay is
then released in the signal, causing smearing and distortion. Better insulation
reduces distortion by absorbing less energy.
Evergreen uses air-filled
Foamed-Polyethylene Insulation on both conductors because air absorbs next to no
energy and Polyethylene is low-loss and has a benign distortion profile. Thanks
to all the air in Foamed-PE, it causes much less of the out-of-focus effect
common to other materials.
Metal-Layer Noise-Dissipation System (NDS)
:
100% shield coverage is easy. Preventing captured RF Interference from
modulating the equipment’s ground reference requires AQ’s Noise-Dissipation
System. Noise-Dissipation System prevents a significant amount of RFI from
reaching the equipment’s ground plane.
AudioQuest’s Noise-Dissipation
System (NDS) offers a compelling solution to this challenge by using metal-only
or alternating layers of metal and carbon-loaded synthetics to effectively
“shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy
before it reaches the layer attached to the ground.
The Evergreen
ultilises the Metal-Layer Noise-Dissipation System (NDS) to prevent most RFI
from reaching the equipment’s ground plane.
Double-Balanced Asymetrical
Geometry :
Geometry is the physical relationship of the conductors to one
another within a cable and determines a cable’s most basic electrical values
(capacitance and inductance). Different cable applications have
different/specialized geometry requirements, and so these applications do not
merely follow a ‘one size fits all’ approach. Better geometry leads to lower
levels of distortion.
Purpose designed for single-ended applications,
Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the
ground for a richer, and more dynamic experience. While many single-ended cable
designs use a single path for both the ground and the shield, Double-Balanced
designs separate the two for cleaner, quieter performance.
Cold-Welded
Gold-Plated RCA Plugs
- Kaubamärk: AudioQuest
- Saadavus: Laos
The Evergreen 2 RCA to 2 RCA cable has 100% shield coverage by virtue of
AudioQuest's Noise-Dissipation System, and Foamed Polyethylene insulation on
Solid Long-Grain Copper conductors working together to reduce distortion.
Metal: Solid Long-Grain Copper (LGC) Conductors,Dielectric:
Foamed-Polyethylene Insulation
Noise-Dissipation System (NDS): Metal-Layer
Noise-Dissipation System