Rated bandwidth: 45 Hz-32 kHz (+/-3 dB).
Nominal impedance: 8
ohms.
Sensitivity: 87 dB (2.83V @ 1 meter full-space,
300-3kHz)
Recommended amplifier power: 20-225 watts.
Speaker
Specs:
Center Channel Loudspeaker
Real black oak veneer and piano gloss
black finish options
Dual gold-plated 5-way binding posts
Dual 1.7"
wide-flared rear-firing ports
Cloth grille with pin/cup retention
system
Elastomer stick-on bumper feet (adds 3mm to height)
Cabinet
Dimensions: 8.2” (H) x 22" (W) x 10.6” (D) (without grille)
Overall
Dimensions: 8.2” (H) x 22” (W) x 10.9” (D) (with grille)
Shipped Dimensions:
14" (H) x 27" (W) x 15" (D)
Weight: 31 pounds
Shipped Weight: 35
pounds
Driver Specs:
1” Aluminum Dome Tweeter:
Vertically aligned
tweeter and midrange improves horizontal axis polar response, with reduced
lobing and comb filtering
FEA-optimized diffuser for airy and unveiled
presentation
Aluminum dome delivers exceptional transient response and
exceptional stiffness/mass ratio
4” Midrange Drivers:
Composite
glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and
pistonic behavior beyond pass band
Aluminum shorting ring to reduce gap
inductance, lower distortion, and enhance high frequency response
Cast
aluminum basket to ensure precise alignment of critical components and
additional heat-sinking capacity
Vented voice coil former to minimize air
compression artifacts at high drive levels
6.5” Woofers:
Composite
glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and
pistonic behavior beyond pass band
Aluminum shorting rings to reduce gap
inductance and lower distortion
Cast aluminum basket to ensure precise
alignment of critical components and additional heat-sinking capacity
Vented
voice coil formers to minimize air compression artifacts at high drive
levels
Crossover & Cabinet Specs:
Crossover:
3-way crossover with
premium-grade capacitors, air-core inductors and heavy-trace printed circuit
boards
Midrange-to-tweeter crossover: 2.2 kHz
Midrange-to-woofer
crossover: 500 Hz
Cabinet:
Acoustically transparent and FEA optimized
grilles, wedge-shaped front baffle and flush-mounted drivers all contribute to
reduced edge diffraction and improved on-axis high frequency
response
FEA-optimized bracing reduces cabinet resonances
SVS Ultra Center keskkõlar
- Mudel: Ultra Center
Rated bandwidth: 45 Hz-32 kHz (+/-3 dB).
Nominal impedance: 8
ohms.
Sensitivity: 87 dB (2.83V @ 1 meter full-space,
300-3kHz)
Recommended amplifier power: 20-225 watts.
Speaker
Specs:
Center Channel Loudspeaker
Real black oak veneer and piano gloss
black finish options
Dual gold-plated 5-way binding posts
Dual 1.7"
wide-flared rear-firing ports
Cloth grille with pin/cup retention
system
Elastomer stick-on bumper feet (adds 3mm to height)
Cabinet
Dimensions: 8.2” (H) x 22" (W) x 10.6” (D) (without grille)
Overall
Dimensions: 8.2” (H) x 22” (W) x 10.9” (D) (with grille)
Shipped Dimensions:
14" (H) x 27" (W) x 15" (D)
Weight: 31 pounds
Shipped Weight: 35
pounds
Driver Specs:
1” Aluminum Dome Tweeter:
Vertically aligned
tweeter and midrange improves horizontal axis polar response, with reduced
lobing and comb filtering
FEA-optimized diffuser for airy and unveiled
presentation
Aluminum dome delivers exceptional transient response and
exceptional stiffness/mass ratio
4” Midrange Drivers:
Composite
glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and
pistonic behavior beyond pass band
Aluminum shorting ring to reduce gap
inductance, lower distortion, and enhance high frequency response
Cast
aluminum basket to ensure precise alignment of critical components and
additional heat-sinking capacity
Vented voice coil former to minimize air
compression artifacts at high drive levels
6.5” Woofers:
Composite
glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and
pistonic behavior beyond pass band
Aluminum shorting rings to reduce gap
inductance and lower distortion
Cast aluminum basket to ensure precise
alignment of critical components and additional heat-sinking capacity
Vented
voice coil formers to minimize air compression artifacts at high drive
levels
Crossover & Cabinet Specs:
Crossover:
3-way crossover with
premium-grade capacitors, air-core inductors and heavy-trace printed circuit
boards
Midrange-to-tweeter crossover: 2.2 kHz
Midrange-to-woofer
crossover: 500 Hz
Cabinet:
Acoustically transparent and FEA optimized
grilles, wedge-shaped front baffle and flush-mounted drivers all contribute to
reduced edge diffraction and improved on-axis high frequency
response
FEA-optimized bracing reduces cabinet resonances
- Kaubamärk: SVS
- Saadavus: Laos
anchors the front stage of a home theater with stunning dynamics, massive
soundstage and pristine clarity for unerring realism and dialogue
intelligibility.
Frequency Response:45 Hz-32 kHz (+/-3 dB),Nominal
impedance: 8 ohms.
Recommended amplifier power: 20-225 watts,FEA-optimized
diffuser for airy and unveiled presentation
Vented voice coil formers to
minimize air compression artifacts at high drive levels.