Frequency Response / Acoustic Data:
Rated bandwidth: 28 Hz-32 kHz (+/-3
dB).
Nominal impedance: 8 ohms.
Sensitivity: 88 dB (2.83V @ 1 meter
full-space, 300-3kHz).
Recommended amplifier power: 20-300 watts.
Speaker
Specs:
Floor Standing Tower Loudspeaker
Real black oak veneer and piano
gloss black finish options
Dual gold-plated 5-way binding posts
3.5"
wide-flared rear-firing port
Cloth grille with pin/cup retention
system
Elastomer screw-in feet - adjustable for level
Spiked metal
screw-in feet included - adjustable for level
Cabinet Dimensions: 45.6” (H) x
13.8” (W) x 16.5” (D) (without grille)
Overall Dimensions: 45.6” (H) x 13.8”
(W) x 16.8” (D) (with grille)
Shipped Dimensions: 50.3" (H) X 21.3" (W) X
22.3" (D)
Weight Unboxed: 75.4 pounds
Shipped Weight: 86 pounds
Driver
Specs:
1” Aluminum Dome Tweeter:
FEA-optimized diffuser for airy and
unveiled presentation
Aluminum dome delivers exceptional transient response
and exceptional stiffness/mass ratio
6.5” Midrange Drivers:
Composite
glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and
pistonic behavior beyond pass band
Aluminum shorting ring to reduce gap
inductance, lower distortion, and enhance high frequency response
Cast
aluminum basket to ensure precise alignment of critical components and
additional heat-sinking capacity
Vented voice coil former to minimize air
compression artifacts at high drive levels
8” Woofers:
Aluminum shorting
rings to reduce gap inductance and lower distortion
Long stroke motor and
suspension for high output
Vented voice coil formers to minimize air
compression artifacts at high drive levels
Crossover & Cabinet
Specs:
Crossover:
3.5-way crossover with premium-grade capacitors,
air-core inductors and heavy-trace printed circuit boards
Unique tapered
midrange array miniimizes off-axis lobing and enhances radiated sound power into
listening space
Top midrange-to-tweeter crossover: 2 kHz
Bottom midrange
taper frequency: 700 Hz
Dual midrange-to-woofer crossover: 160
Hz
Cabinet:
Separate sealed midrange enclosures minimize top-to-bottom
wall dimensions and shift standing waves beyond the driver pass band, minimizing
negative driver interaction and associated frequency response
degradation
Non-parallel cabinet panels reduces axial standing waves within
the cabinet, reducing frequency response coloration
Acoustically transparent
and FEA optimized grilles, wedge-shaped front baffle and flush-mounted drivers
all contribute to reduced edge diffraction and improved on-axis high frequency
response
FEA-optimized bracing, 1" thick midrange/tweeter baffles and 1.5"
thick woofer baffles eliminates structural resonances and ensures the cabinet
remains acoustically inert for uncolored response even at the highest drive
levels
SVS Ultra Tower põrandakõlarid
- Mudel: Ultra Tower
Frequency Response / Acoustic Data:
Rated bandwidth: 28 Hz-32 kHz (+/-3
dB).
Nominal impedance: 8 ohms.
Sensitivity: 88 dB (2.83V @ 1 meter
full-space, 300-3kHz).
Recommended amplifier power: 20-300 watts.
Speaker
Specs:
Floor Standing Tower Loudspeaker
Real black oak veneer and piano
gloss black finish options
Dual gold-plated 5-way binding posts
3.5"
wide-flared rear-firing port
Cloth grille with pin/cup retention
system
Elastomer screw-in feet - adjustable for level
Spiked metal
screw-in feet included - adjustable for level
Cabinet Dimensions: 45.6” (H) x
13.8” (W) x 16.5” (D) (without grille)
Overall Dimensions: 45.6” (H) x 13.8”
(W) x 16.8” (D) (with grille)
Shipped Dimensions: 50.3" (H) X 21.3" (W) X
22.3" (D)
Weight Unboxed: 75.4 pounds
Shipped Weight: 86 pounds
Driver
Specs:
1” Aluminum Dome Tweeter:
FEA-optimized diffuser for airy and
unveiled presentation
Aluminum dome delivers exceptional transient response
and exceptional stiffness/mass ratio
6.5” Midrange Drivers:
Composite
glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and
pistonic behavior beyond pass band
Aluminum shorting ring to reduce gap
inductance, lower distortion, and enhance high frequency response
Cast
aluminum basket to ensure precise alignment of critical components and
additional heat-sinking capacity
Vented voice coil former to minimize air
compression artifacts at high drive levels
8” Woofers:
Aluminum shorting
rings to reduce gap inductance and lower distortion
Long stroke motor and
suspension for high output
Vented voice coil formers to minimize air
compression artifacts at high drive levels
Crossover & Cabinet
Specs:
Crossover:
3.5-way crossover with premium-grade capacitors,
air-core inductors and heavy-trace printed circuit boards
Unique tapered
midrange array miniimizes off-axis lobing and enhances radiated sound power into
listening space
Top midrange-to-tweeter crossover: 2 kHz
Bottom midrange
taper frequency: 700 Hz
Dual midrange-to-woofer crossover: 160
Hz
Cabinet:
Separate sealed midrange enclosures minimize top-to-bottom
wall dimensions and shift standing waves beyond the driver pass band, minimizing
negative driver interaction and associated frequency response
degradation
Non-parallel cabinet panels reduces axial standing waves within
the cabinet, reducing frequency response coloration
Acoustically transparent
and FEA optimized grilles, wedge-shaped front baffle and flush-mounted drivers
all contribute to reduced edge diffraction and improved on-axis high frequency
response
FEA-optimized bracing, 1" thick midrange/tweeter baffles and 1.5"
thick woofer baffles eliminates structural resonances and ensures the cabinet
remains acoustically inert for uncolored response even at the highest drive
levels
- Kaubamärk: SVS
- Saadavus: Laos
Flagship SVS floorstanding speaker stands toe-to-toe with the finest
loudspeakers in the world delivering reference sound for music and home
theater.
Rated bandwidth: 28 Hz-32 kHz,Nominal impedance: 8
ohms.
Sensitivity: 88 dB,Recommended amplifier power: 20-300
watts.
Aluminum shorting rings to reduce gap inductance and lower
distortion
Vented voice coil formers to minimize air compression artifacts at
high drive levels
Hind paari eest!