Frequency Response / Acoustic Data:
23Hz to 240Hz +/-3dB
Roll-off
slope specifically optimized to take maximum advantage of available room
gain
2-meter ground plane away from reflective structures
(quasi-anechoic)
Subwoofer Specs:
Dimensions (including grilles):
10.9” (278mm) H X 11.7” (297mm) W X 10.7” (271mm) D
Weight: 22.5lbs
(10.2kg)
Packaged Dimensions: 13.9” (353mm) H X 15.4” (390mm) W X 15.4”
(390mm) D
Packaged Weight: 26.7lbs (12.1kg)
Dual opposing 8-inch active
drivers designed acoustically and electrically in parallel
800-watt RMS,
2,500-watt peak Sledge STA-800D amplifier with fully discrete MOSFET
output
Rear-mounted internal amplifier with Intelligent Control Interface
(ICI)
High-end Piano Gloss Black and Piano Gloss White finish
options
Screw-in rubber feet
Structurally reinforced MDF cabinet
construction
Driver Specs:
Dual opposing 8-inch drivers designed
electrically and mechanically in parallel for massive output from and a
sonically inert cabinet, and ultra-low system vibration even at maximum output
levels
Precisely tuned overhung motor configuration for precise woofer
control at all drive levels
Proprietary injection-molded NBR surround built
for extreme-excursion and longevity at reference playback levels
Total
Excursion (each driver): 24mm Xmax, 37mm Xmech.
1100 aluminum single piece
cone and junction provide excellent stiffness and a lightweight moving mass with
optimized thermal conduction.
High-current 4-layer copper voice coil winding
minimizes distortion and power compression, while providing effective heat
dissipation and tuned magnetics for accuracy at high excursion.
Powerful
proprietary ferrite motor system generates high-flux-density magnetic fields to
drive room-filling sound pressure levels with pinpoint transient
speed.
Precision machining for motor and narrow tolerance suspension
parts maintain control and linearity at full excursion
6061 aluminum shorting
ring improves linearity of magnetics and reduces distortion and gap
inductance
High-temperature 5025-H18 aluminum former/bobbin
5-inch
composite poly-cotton extreme-linear-excursion spider
Dual 24-strand plated
copper leads
High-performance oversized Y30 Ferrite magnet motor
Top plate
assembly with low carbon 1010 steel completes the driver’s precision magnetic
circuit
Oversized low carbon 1010 steel U-yoke for maximum cooling
Dual
8-inch baskets with FEA optimized powder-coated frames for maximum rigidity,
thermal conductivity, and mechanical damping
Amplifier
Specs:
Effortless on-demand power from 800-watt RMS, 2,500-watt peak
Sledge STA-800DM amplifier with fully-discrete MOSFET output
High-efficiency
Class-D switching topology with massive 25-amp 600-volt MOSFETs results in ample
current, vanishing distortion and excellent linearity to generate massive
low-frequency output with pinpoint accuracy
High-resolution 50MHz Analog
Devices Audio DSP with double precision 56-bit filtering industry best
processing power for advanced control and pristine output
User adjustable
settings for system performance optimization: low pass filter, phase, polarity,
room gain, and three parametric equalizers
Groundbreaking SVS subwoofer DSP
and Bluetooth smartphone control app for iOS, Android and Amazon devices allow
custom tuning and user presets for every room and system
Stereo RCA input and
output with ultra-wide input voltage for consumer and professional audio
applications
Rear panel Intelligent Control Interface (ICI) user
interface with blue-LED light bar display and easy push-button
controls
Auto/On and 3-12V AC/DC trigger for Maximum Installation
Convenience
Input impedance 16 kΩ (unbalanced
RCA)
Environmentally-friendly 0.5-watt low-standby-power consumption
RoHS
compliant, lead-free construction, world-wide safety certifications
SVS
App Specs:
Powerful Bluetooth-controlled subwoofer DSP app works with
iOS, Android, and Amazon operating systems
Provides easy and convenient way
to adjust crossover frequencies, parametric EQ, polarity, room gain and all
other bass-management functions
Three convenient custom presets allow for
perfect tuning in any room or system, from your favorite
seat
Bidirectional-feedback shows adjustments in real time on both app
and subwoofer rear panel interface
Included Accessories:
Dual
protective non-resonant steel mesh grilles
Isolating elastomer
feet
Heavy-duty, high-current 6-foot power cord
Quick Start Guide
SVS 3000 Micro subwoofer
- Mudel: 3000 Micro
Frequency Response / Acoustic Data:
23Hz to 240Hz +/-3dB
Roll-off
slope specifically optimized to take maximum advantage of available room
gain
2-meter ground plane away from reflective structures
(quasi-anechoic)
Subwoofer Specs:
Dimensions (including grilles):
10.9” (278mm) H X 11.7” (297mm) W X 10.7” (271mm) D
Weight: 22.5lbs
(10.2kg)
Packaged Dimensions: 13.9” (353mm) H X 15.4” (390mm) W X 15.4”
(390mm) D
Packaged Weight: 26.7lbs (12.1kg)
Dual opposing 8-inch active
drivers designed acoustically and electrically in parallel
800-watt RMS,
2,500-watt peak Sledge STA-800D amplifier with fully discrete MOSFET
output
Rear-mounted internal amplifier with Intelligent Control Interface
(ICI)
High-end Piano Gloss Black and Piano Gloss White finish
options
Screw-in rubber feet
Structurally reinforced MDF cabinet
construction
Driver Specs:
Dual opposing 8-inch drivers designed
electrically and mechanically in parallel for massive output from and a
sonically inert cabinet, and ultra-low system vibration even at maximum output
levels
Precisely tuned overhung motor configuration for precise woofer
control at all drive levels
Proprietary injection-molded NBR surround built
for extreme-excursion and longevity at reference playback levels
Total
Excursion (each driver): 24mm Xmax, 37mm Xmech.
1100 aluminum single piece
cone and junction provide excellent stiffness and a lightweight moving mass with
optimized thermal conduction.
High-current 4-layer copper voice coil winding
minimizes distortion and power compression, while providing effective heat
dissipation and tuned magnetics for accuracy at high excursion.
Powerful
proprietary ferrite motor system generates high-flux-density magnetic fields to
drive room-filling sound pressure levels with pinpoint transient
speed.
Precision machining for motor and narrow tolerance suspension
parts maintain control and linearity at full excursion
6061 aluminum shorting
ring improves linearity of magnetics and reduces distortion and gap
inductance
High-temperature 5025-H18 aluminum former/bobbin
5-inch
composite poly-cotton extreme-linear-excursion spider
Dual 24-strand plated
copper leads
High-performance oversized Y30 Ferrite magnet motor
Top plate
assembly with low carbon 1010 steel completes the driver’s precision magnetic
circuit
Oversized low carbon 1010 steel U-yoke for maximum cooling
Dual
8-inch baskets with FEA optimized powder-coated frames for maximum rigidity,
thermal conductivity, and mechanical damping
Amplifier
Specs:
Effortless on-demand power from 800-watt RMS, 2,500-watt peak
Sledge STA-800DM amplifier with fully-discrete MOSFET output
High-efficiency
Class-D switching topology with massive 25-amp 600-volt MOSFETs results in ample
current, vanishing distortion and excellent linearity to generate massive
low-frequency output with pinpoint accuracy
High-resolution 50MHz Analog
Devices Audio DSP with double precision 56-bit filtering industry best
processing power for advanced control and pristine output
User adjustable
settings for system performance optimization: low pass filter, phase, polarity,
room gain, and three parametric equalizers
Groundbreaking SVS subwoofer DSP
and Bluetooth smartphone control app for iOS, Android and Amazon devices allow
custom tuning and user presets for every room and system
Stereo RCA input and
output with ultra-wide input voltage for consumer and professional audio
applications
Rear panel Intelligent Control Interface (ICI) user
interface with blue-LED light bar display and easy push-button
controls
Auto/On and 3-12V AC/DC trigger for Maximum Installation
Convenience
Input impedance 16 kΩ (unbalanced
RCA)
Environmentally-friendly 0.5-watt low-standby-power consumption
RoHS
compliant, lead-free construction, world-wide safety certifications
SVS
App Specs:
Powerful Bluetooth-controlled subwoofer DSP app works with
iOS, Android, and Amazon operating systems
Provides easy and convenient way
to adjust crossover frequencies, parametric EQ, polarity, room gain and all
other bass-management functions
Three convenient custom presets allow for
perfect tuning in any room or system, from your favorite
seat
Bidirectional-feedback shows adjustments in real time on both app
and subwoofer rear panel interface
Included Accessories:
Dual
protective non-resonant steel mesh grilles
Isolating elastomer
feet
Heavy-duty, high-current 6-foot power cord
Quick Start Guide
- Kaubamärk: SVS
- Saadavus: Laos
The miniature yet mighty SVS 3000 Micro subwoofer seamlessly blends into any
room and speaker system, energizing the space with astonishingly rich,
effortless bass that’s all the more impressive given its micro-sized
enclosure
Frequency Response 23Hz to 240Hz +/-3dB
Dual opposing 8-inch
active drivers designed acoustically and electrically in parallel
800-watt
RMS, 2,500-watt peak Sledge STA-800D amplifier with fully discrete MOSFET output