17-200 Hz ± 3 dB (standard mode)
16-200 Hz ± 3 dB (extended mode)
15-200
Hz ± 3 dB (sealed mode)
Roll-off slope specifically optimized to take maximum
advantage of available room gain.
2-meter ground plane away from reflective
structures (quasi-anechoic).
Subwoofer Specs:
Piano Gloss Black
finish
Protective non-resonant steel mesh grille
Down-firing 13.5"
driver
Rear-mounted amplifier
Screw-in elastomer SoundPath Subwoofer
Isolation System
Robust Medium Density Fiberboard (MDF) cabinet
construction
Cabinet Dimensions: 46.9” (1190mm) H X 16.5” (419mm)
Diameter
Shipped Dimensions: 50.9” (1292mm) H X 18.8” (478mm) W X 19.2”
(487mm) D
Weight (unboxed): 92.4 lbs. (41.9 kg)
Shipped Weight: 108.8lbs
(49.35kg)
Driver Specs:
High performance SVS 4000 Series Subwoofer Driver
- optimized for ported cabinet design.
Proprietary 13.5” Down-Firing Driver
with finely tuned Underhung Motor Configuration
49.6lb (22.5kg) pound Woofer
with 44.3lb (20.1kg) pounds for the motor
Underhung 53mm Xmax, 91.6mm Xmech
precision aligned excursion
8-layer aluminum flat wire edge wound 3” voice
coil for ultra-low distortion, efficient heat dissipation, exceptional linearity
and nearly zero power compression.
Two massive, dedicated toroidal ferrite
magnets generate unparalleled levels of magnetic force to drive the highest
levels of excursion, SPL, and start/go power for the deepest and most
authoritative bass possible.
All-new High density FEA-optimized cast aluminum
basket provides unequaled levels of rigidity, tensile strength, and energy
transference available from a subwoofer.
Dual 24-strand copper and Nomex
composite high-temperature leads woven through the suspension provide a pristine
electrical connection from the amplifier to the voice coil.
Premium glass
fiber laminated dustcap and reinforced and vented paper-composite cone
sub-structure ensure a light, ridged, and neutral radiating
surface.
Precision machined motor elements and narrow tolerance suspension
parts produce unmatched linearity at full excursion for exceptionally tight and
fast output, even at reference volumes.
Extreme oversized low carbon vented
steel U-yoke and top plate provide superior cooling and improved magnetics for
maximum performance and efficiency.
Copper ring shorting sleeve reduces gap
induction and distortion, enhances thermal conductivity
Nickle-plated
high-tension spring terminals
Proprietary injection molded gasket and
parabolic SBR extreme-excursion surround maintains ideal pistonic motion for
pinpoint accuracy and control
Low carbon 1008 steel components with black
electrophoresis plating
Amplifier Specs:
Massively powerful Sledge
1,200-watt continuous Class D design with 4,000+ watts of Peak
Power.
Unmatched intelligence from user adjustable low pass, phase, polarity
and room gain compensation with three parametric EQs and port tuning (Ported
models only) for absolute best alignment with speakers and optimized performance
in any room.
Groundbreaking SVS Bluetooth DSP control app for iOS and Android
devices with three user presets allow custom tuning for every room and
system.
High efficiency cool-running Class D switching topology with massive
32 Amp 600 Volt MOSFET’s result in lower EMI and highest efficiency while
providing effortless power to produce SPLs and low frequency output with
pristine clarity well beyond reference listening levels.
High resolution
50Mhz Analog Devices Audio DSP with double precision 56bit filtering is most
advanced subwoofer processor available for perfect audio
reproduction.
100v-240v full range input active Power Factor Correction (PFC)
pre-regulates mains to solid 360V DC regardless of mains voltage or quality so
the sound quality never falters no matter what’s coming out of the
wall
Active PFC lowers average current and smooths mains input current
allowing for 1200W output from a standard 15A mains circuit.
XLR and RCA
stereo input/output with ultra-wide input voltage for consumer and professional
audio applications.
Convenient front-mounted display featuring new
Intelligent Feature Control (IFC) with bright blue dimmable/defeatable 8-digit
LED front display.
Custom EQ and DSP limiter settings tuned specifically for
the PC-4000 cylinder cabinet design. Auto/On and 3-30V AC/DC trigger for Maximum
Installation Convenience.
Input impedance 22kohm (unbalanced RCA)/ 22kohm
(balanced XLR).
Green 0.5-watt low standby power consumption
RoHS
compliant, lead-free construction, world-wide safety certifications
SVS App
Specs:
The most powerful and flexible Bluetooth controlled subwoofer DSP app,
works with both iOS and Android operating systems.
Easiest and most
convenient way to adjust crossover frequencies, parametric EQ, polarity, room
gain and all other bass management functions.
Three convenient custom presets
allow for perfect tuning in any room or system, from your favorite
seat.
Single tap adjustment for controlling variable port tuning with
standard, extended and sealed modes.
Unique bidirectional feedback shows
adjustments in real time on both app and subwoofer interface.
Easy-to-follow
tutorial provides clear guidance for all functions.
Included
Accessories:
Protective non-resonant steel mesh grill
IR remote
control
3 x Foam Port Tuning Plugs
SoundPath Subwoofer Isolation
System
Extra heavy-duty, high current 6' power cord
PC-4000 Subwoofer
Manual
Quick Start Guide
SVS PC-4000 subwoofer
- Mudel: PC-4000
17-200 Hz ± 3 dB (standard mode)
16-200 Hz ± 3 dB (extended mode)
15-200
Hz ± 3 dB (sealed mode)
Roll-off slope specifically optimized to take maximum
advantage of available room gain.
2-meter ground plane away from reflective
structures (quasi-anechoic).
Subwoofer Specs:
Piano Gloss Black
finish
Protective non-resonant steel mesh grille
Down-firing 13.5"
driver
Rear-mounted amplifier
Screw-in elastomer SoundPath Subwoofer
Isolation System
Robust Medium Density Fiberboard (MDF) cabinet
construction
Cabinet Dimensions: 46.9” (1190mm) H X 16.5” (419mm)
Diameter
Shipped Dimensions: 50.9” (1292mm) H X 18.8” (478mm) W X 19.2”
(487mm) D
Weight (unboxed): 92.4 lbs. (41.9 kg)
Shipped Weight: 108.8lbs
(49.35kg)
Driver Specs:
High performance SVS 4000 Series Subwoofer Driver
- optimized for ported cabinet design.
Proprietary 13.5” Down-Firing Driver
with finely tuned Underhung Motor Configuration
49.6lb (22.5kg) pound Woofer
with 44.3lb (20.1kg) pounds for the motor
Underhung 53mm Xmax, 91.6mm Xmech
precision aligned excursion
8-layer aluminum flat wire edge wound 3” voice
coil for ultra-low distortion, efficient heat dissipation, exceptional linearity
and nearly zero power compression.
Two massive, dedicated toroidal ferrite
magnets generate unparalleled levels of magnetic force to drive the highest
levels of excursion, SPL, and start/go power for the deepest and most
authoritative bass possible.
All-new High density FEA-optimized cast aluminum
basket provides unequaled levels of rigidity, tensile strength, and energy
transference available from a subwoofer.
Dual 24-strand copper and Nomex
composite high-temperature leads woven through the suspension provide a pristine
electrical connection from the amplifier to the voice coil.
Premium glass
fiber laminated dustcap and reinforced and vented paper-composite cone
sub-structure ensure a light, ridged, and neutral radiating
surface.
Precision machined motor elements and narrow tolerance suspension
parts produce unmatched linearity at full excursion for exceptionally tight and
fast output, even at reference volumes.
Extreme oversized low carbon vented
steel U-yoke and top plate provide superior cooling and improved magnetics for
maximum performance and efficiency.
Copper ring shorting sleeve reduces gap
induction and distortion, enhances thermal conductivity
Nickle-plated
high-tension spring terminals
Proprietary injection molded gasket and
parabolic SBR extreme-excursion surround maintains ideal pistonic motion for
pinpoint accuracy and control
Low carbon 1008 steel components with black
electrophoresis plating
Amplifier Specs:
Massively powerful Sledge
1,200-watt continuous Class D design with 4,000+ watts of Peak
Power.
Unmatched intelligence from user adjustable low pass, phase, polarity
and room gain compensation with three parametric EQs and port tuning (Ported
models only) for absolute best alignment with speakers and optimized performance
in any room.
Groundbreaking SVS Bluetooth DSP control app for iOS and Android
devices with three user presets allow custom tuning for every room and
system.
High efficiency cool-running Class D switching topology with massive
32 Amp 600 Volt MOSFET’s result in lower EMI and highest efficiency while
providing effortless power to produce SPLs and low frequency output with
pristine clarity well beyond reference listening levels.
High resolution
50Mhz Analog Devices Audio DSP with double precision 56bit filtering is most
advanced subwoofer processor available for perfect audio
reproduction.
100v-240v full range input active Power Factor Correction (PFC)
pre-regulates mains to solid 360V DC regardless of mains voltage or quality so
the sound quality never falters no matter what’s coming out of the
wall
Active PFC lowers average current and smooths mains input current
allowing for 1200W output from a standard 15A mains circuit.
XLR and RCA
stereo input/output with ultra-wide input voltage for consumer and professional
audio applications.
Convenient front-mounted display featuring new
Intelligent Feature Control (IFC) with bright blue dimmable/defeatable 8-digit
LED front display.
Custom EQ and DSP limiter settings tuned specifically for
the PC-4000 cylinder cabinet design. Auto/On and 3-30V AC/DC trigger for Maximum
Installation Convenience.
Input impedance 22kohm (unbalanced RCA)/ 22kohm
(balanced XLR).
Green 0.5-watt low standby power consumption
RoHS
compliant, lead-free construction, world-wide safety certifications
SVS App
Specs:
The most powerful and flexible Bluetooth controlled subwoofer DSP app,
works with both iOS and Android operating systems.
Easiest and most
convenient way to adjust crossover frequencies, parametric EQ, polarity, room
gain and all other bass management functions.
Three convenient custom presets
allow for perfect tuning in any room or system, from your favorite
seat.
Single tap adjustment for controlling variable port tuning with
standard, extended and sealed modes.
Unique bidirectional feedback shows
adjustments in real time on both app and subwoofer interface.
Easy-to-follow
tutorial provides clear guidance for all functions.
Included
Accessories:
Protective non-resonant steel mesh grill
IR remote
control
3 x Foam Port Tuning Plugs
SoundPath Subwoofer Isolation
System
Extra heavy-duty, high current 6' power cord
PC-4000 Subwoofer
Manual
Quick Start Guide
- Kaubamärk: SVS
- Saadavus: Laos
Unique cylinder cabinet design saves floorspace while delivering chest-pounding,
pinpoint accurate output comparable with ported box designs.
Driver 13.5"
,Amplifier 1200 watts RMS (4000+ watts peak)
High efficiency cool-running
Class D switching topology with massive 32 Amp 600 Volt MOSFET’s
parametric
EQ, polarity, room gain and all other bass management functions
Frequency
Response 15-200 Hz,Dimensions:1190mm X419mm Diameter