Виниловые проигрыватели

Integrated high quality Rega MM phono stage,RB110 tonearm with ultra-low friction play bearings

Factory fitted Rega Carbon moving magnet cartridge,EBLT advanced drive belt

Phenolic resin, flywheel effect platter

The Planar 6 features the RB330 tonearm and a dual-layer float glass platter. 

Dual layer float glass platter,Double brace technology
Tancast 8 foamcore plinth,Custom matched Neo PSU
При желании к нему можно добавить головку Exact, Ania или Ania Pro.

The Fono MC MK4 is an exceptionally high quality MC phono stage designed to maximise the potential of any low output MC cartridge.

Dedicated moving coil phono stage,Simple connectivity and operation
Fully adjustable via DIP switches via rear panel,Two selectable gain settings
Default factory settings matched for all Rega MC models.

The consequent enhancement of our succesful tube phono preamplifier, the PHO-700, has now the possibility to make exact adjustments for the pick-up cartridge through DIP-switches.

Frequency Response: 10 Hz – 20 kHz,T.H.D.: <0.05% (20 Hz - 20 kHz)
Input impedance: MM: 47 kOhm, MC: 99 - 1000 Ohm (adjustable)
Inputs: 1 x Stereo RCA,Outputs: 1 x Stereo RCA, USB

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series.

Stable and super silent direct drive,THORENS TP 150 tonearm
Detachable SME Headshell,Pre installed cartridge Ortofon 2 M Blue
Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
Speeds 33-1/3, 45 rpm.,Speed select electronical

Our turntables demand conscious music listening. The Debut PRO S takes this philosophy to the extreme.

Speed: 33, 45/(78) (electronic speed change)
pre-adjusted Pick it S2 C cartridge,10” S-shape aluminium tonearm
aluminium sub-platter,Fully adjustable VTA
Gold plated RCA connectors,Dust cover included.

With 30 years' experience designing state-of-the-art discrete transistor circuits, we have built a phono preamplifier like no other. It is neutral, dynamic, and exceptionally revealing.

MM and MC,Subsonic Filter,Balanced (XLR) output
Highly optimizable,Auto standby,Frequency Response: 2Hz - 20kHz
Ultra low noise discrete JFET transistor input stage for both MC and MM

The ‘Planar 3’ is a completely new turntable carrying over just two components from the previous RP model. 


RB330 precision tonearm,Double brace technology
24 V low noise, low vibration motor,12 mm float glass opti-white polished platter
Supplied with clear dust cover as standard.

The Planar 10 was inspired by the ultimate Rega turntable, the Naiad. Built around our ultra-light skeletal plinth, constructed from Tancast 8 core and covered in a high-pressure laminate (HPL) skin.

RB3000 tonearm,Ceramic Oxide diamond cut platter,PL10 PSU
Apheta 3 or Aphelion 2 factory fitted (optional)
DB technology with ceramic top brace,Tancast 8 foamcore plinth
P10 custom matched PSU,Reference EBLT drive belt fitted as standard

The PP 2e Phono Preamplifier offers superb performance in a clean and simple package.

compatible with moving magnet and moving coil phono cartridges
signal-sensing auto power standby
high-efficiency external power supply for reduced noise
gold-plated input and output jacks for reliable

With the addition of the PP 4 to your home system, the LPs you cherish the most come alive in the form of expansive and rich sound.

built-in analog-to-digital converter to convert vinyl to digital files
compatible with moving magnet and moving coil phono cartridges
outputs 16-bit/48kHz PCM digital audio

A product that critical listeners can applaud for its musical quality, and one that almost anybody can afford.

Belt Driven Turntable 33/45,10mm Glass Plater with Felt Pad
Precision AC Motor, Isolated AC Power Supply with
9” Tonearm with Fixed Head Shell,Ortofon OM10 Cartridge Preinsatalled

NAD’s is well known for innovative, high performance, yet affordable, turntables. While the basic operation of a turntable seems simple, extracting all the musical energy from the record grooves without exciting destructive resonances requires both science and art.

Belt Driven Turntable 33/45,10mm Glass Platter with Felt Pad
Precision Alloy Sub Platter,Precision AC Motor,
9” Carbon Fibre Tonearm with Fixed Head Shell,
Ortofon 2M Red Cartridge Preinstalled

The Fono MM MK5 phono stage has been designed to be effective, easy to use and above all, to reproduce music.

Dedicated Moving Magnet stage,Simple connectivity and operation
Custom case design,Two stage RIAA Equalization

The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking.

Cartridge Rega Carbon cartridge supplied fitted as standard.
The first entry level Rega turntable to use a 24v,
Phenolic resin, flywheel effect platter,synchronous AC motor

Every feature of this innovative new turntable is designed to extract the maximum amount of information and detail from your vinyl collection.

RB220 precision tonearm,Rega Carbon cartridge factory fitted
24 V low noise, low vibration motor,10 mm float glass opti-white platter
Gloss finish supplied with clear dust cover as standard
Advanced EBLT drive belt fitted as standard from March 2021

Ania uses the same complex hand wound micro coil found in the rest of the range, and is housed in a unique PPS highly rigid body.

Iron micro cross assembly,Elliptical profile stylus
Aluminium cantilver,Coil constructed from 0.018 mm fine wire
One of the worlds smallest MC generators
Cutting edge high power Neodymium magnets

The latest member of our Rega MC cartridge range the Ania Pro uses our advanced Vital profile nude diamond stylus. 

Vital profile nude diamond,Aluminium tapered cantilever
Iron micro cross assembly,Cutting edge high power Neodymium magnets
Coil constructed from 0.018 mm fine wire

One fully adjustable, dedicated moving coil and one moving magnet.Each stage is designed and engineered to maximise the potential of your vinyl system

High performance switchable MC & MM stage
Fully adjustable MC stage,Custom designed case
MM input uses low noise bipolar transistors
Bespoke input circuitry for MM & MC

With the Apheta 3 we have pushed another boundary, for several years we have been developing state of the the art diamond profiles.

Fine line profile nude diamond stylus,Iron micro cross assembly
Ultra high powered custom Neodymium magnet
High specification wire,Aluminium CNC machined one piece body

Our aim was to deliver a level of performance far beyond what has been achieved at this price point before

RB880 precision tonearm,Double brace technology
Super flywheel effect triple layer glass platter
Tancast 8 foam core plinth,Custom matched Neo psu
Reference EBLT drive belt fitted as standard
Ania, Ania Pro, Apheta 3 factory fitted (optional)

Aphelion 2 is the 4th generation of our unique handmade moving coil cartridges.our engineers have now fine-tuned every aspect of the original designs.

Graded zero tolerance black anodised aluminium body
Boron rod cantilever,Fine line profile, nude diamond stylus
Iron micro cross and coil assembly making one of the worlds smallest MC generators
most powerful minaturised neodymium magnet,High specification fine wire 0.018 mm

The reference Aura MC stage is the culmination of decades of electronic design development. We have created the ultimate, fully adjustable, three-stage, all symmetrical pre-amplifier designed purely to extract the very best performance from your moving coil cartridge and vinyl playback system.

Three stage, all symmetrical pre-amplifier,Fully adjustable
Compatible with all typical low output moving coil cartridges

It doesn‘t matter if you are a beginner, returnee or experienced vinyl fan. The E1 won‘t disappoint you! 

built in switchable Phono Preamp,Anti-resonant ABS polymer main platter
Reworked tonearm design & new headshell,Ortofon quality OM5e cartridge
High quality phono cables (1,23 m),Vibration absorbing feet
Elegant dust cover with adjustable hinges,Silicon belt with optimum 

Time for Evolution. We have taken our most popular turntable design and improved every aspect of it.

Speed: 33, 45/(78) (electronic speed change)
Drive principle: belt drive with electronic speed control
Tonearm: 8,6” one-piece carbon tonearm
Ortofon 2M Red cartridge,dust cover

The Thorens TD 402 DD comes as out of the box solution for easy use. It has got a very silent, innovative direct drive motor in combination with an integrated phono pre amp and auto start and auto stop function.

The new tonearm Thorens TP 72 uses a carbon tube,
Type MM type (Audio-Technica VM95E),Speed 33 1/3 RPM, 45 RPM
Platter Aluminum Die-cast,Anti-skating Adjustment Supported
Drive System Direct Drive,Motor DD Motor

Pro-Ject has been in the turntable business for 30 years, and they're celebrating by releasing the Debut PRO — the best model yet in the company's popular Debut Series.

pre-adjusted Pick it PRO cartridge,fully adjustable VTA
8,6” one-piece carbon-aluminium tonearm
precision aluminium platter with TPE damping
Speed: 33, 45/(78) (electronic speed change)

We treated the surface of this deck with a mirror-finished metal logo contour that gives the player its distinctive look. 

Pre-adjusted Pick it S2 C cartridge & SME headshell
8,6” S-shape aluminium tonearm
Heavy MDF plinth in unique Metallica design
Height-adjustable metal feet,Gold plated RCA connectors
Speed: 33, 45/(78) (electronic speed change)

The new Classic Evo is based on the successful EISA Award winner Pro-Ject The Classic.

Improved sandwich subchassis,Height adjustable decoupling feet
Ortofon 2M Silver cartridge pre-installed
Belt drive with electronic speed control 33/45 rpm
9” carbon/aluminium tonearm with MM and MC capability

Xtension 9 Evolution incorporates all our turntable design experience from more than 20 years in a slim-line size to fit standard audio racks.

Heavy 16 kg belt drive turntable,Mass loaded magnetic floating subchassis
Precision balanced sandwich-platter
inverted ceramic ball bearing with magnetic support
Electronic speed control 33/45 rpm,Acrylic dust cover
Tonearm 9cc Evolution made from carbon fibre

an uncompromising high-end turntable combining mass loading with magnetically- loating turntable principles.

Mass-loaded belt drive subchassis design
Magnetically decoupled main platter
Motor control system for perfect speed stability
Single-pivot tonearm Signature 10
Speed: 33, 45 electronic speed change

Phono-Preamplifier for connecting your turntable to a line input of your amplifier. The low-noise phono-preamp is suitable for MM and MC cartridges.

Frequency Response: 10 Hz – 20 kHz
Input Sensitivity MM: 58 mV, MC: 6,8 mV
Inputs: 1 x Stereo RCA,Outputs: 1 x Stereo RCA

Very complex is also the external power supply which minimizes all influences from outside.

Frequency Response: 10 Hz - 20 kHz
Input Sensitivity: MM: 58 mV, MC: 6,8 mV
Inputs: 1 x Stereo RCA,Outputs: 1 x Stereo RCA

A unsophisticated and low noise playback is the "job" of a good phono preamplifier.With the PHO-500 we managed this. T

you can make individual adjustments by DIP-switches on the PHO-500.
Frequency Response: 10 Hz – 20 kHz
Signal-to-Noise: MM: > 83 dB, MC: > 70 dB
Input Impedance: MM: 47 KOhm, MC: 100 Ohm - 1000 Ohm (adjustbale)

A step into the future with a tribute to the past. Meet our game-changing wireless turntable designed for a new generation of audiophiles.

Wirelessly connect to any MusicCast device for seamless listening
Straight tonearm contributes to sound transparency and openness
Belt drive turntable,Rotation Speed 33-1/3 rpm, 45 rpm,DC motor
Music streaming services built-in,Wi-Fi built-in dual bands.

Full automatic belt drive turntable,Static balance straight tonearm
High Quality MDF construction for improved resonance reduction
Detachable acrylic dust cover,Built in MM type phono pre amplifier
High quality MM cartridge AT3600L by audio technica pre installed
Phono and Line outputs,2 speed (33/45 RPM)

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth® capability. 

Belt-drive turntable,Built-in Phono equalizing amplifier
Built-in Bluetooth® transmitter to BT speakers or headphones
High-density MDF cabinet for improved resonance reduction
3-speed (33-1/3, 45, 78 rpm),Auto-return and manual arm lifter

It brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required.

2-speed Belt-drive turntable,Built-in Bluetooth transmitter
Built-in MM phono equalizer and Phono, Line, and Bluetooth outputs
High-performance MM cartridge included
Aluminum die-cast platter,Anti-skating mechanism
High-density MDF cabinet for better vibration and resonance

It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution.

Belt-drive mechanism,Anti-skating mechanism
2-speed turntable supporting 33-⅓ and 45 rpm
Built-in PHONO EQ amplifier compatible with MM-type cartridges
USB digital audio output for digitising records on a PC/Mac
Pre-installed AT-VM95E cartridge supplied by audio-technica

A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.

Robust high-density MDF plinth provides both vibration isolation and elegance
Available in a selection of contemporary matt finishes, or a natural walnut veneer
3-speed belt-drive mechanism with aluminum die-cast platter (33-1/3, 45, 78 rpm)
Pre-installed MM-type AT95E cartridge from audio-technical
Built-in TI A/D Converter allo..

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing.

Pre-installed Oyster cartridge by SUMIKO,2-speed drive offering 33-⅓ and 45 rpm
Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
Digital recording on PC/Mac via USB digital audio output,Direct-drive anal..

This analog turntable, which supports MC balanced output, features a hybrid chassis that combines synthetic marble, washi paper and MDF materials along with a 9-inch S-shaped universal arm that utilizes a knife-edge bearing.

Rotation speeds of 33-⅓, 45 and 78 RPM supported
Static-balanced knife-edge-bearing tone arm,Ortofon 2M RED MM cartridges included
VTA adjustment (tone arm height adjustment) function (+6 mm)
Anti-skating function,Powered arm lifter,XLR balance..