Moving Coil Cartridge with boron cantilever and microlinear cut
With an
output voltage of 0.6mV (5.5cm/sec) and 12 ohms internal resistance, the pick-up
harmonises with all common phono preamplifiers. A naked diamond with microlinear
cut in combination with a solid boron cantilver guarantee best pickup capability
and sound quality.
The THORENS TAS 1500 is an MC pickup manufactured for
THORENS in Japan. The aim of the development was the optimal combination of the
pick-up in combination with the TD 1500 and TD 403 DD turntable and the TP 150
precision tonearm. With an output voltage of 0.6mV (5.5cm/sec) and 12 ohms
internal resistance, the pick-up harmonises with all common phono
pream-plifiers. A naked diamond with microlinear cut in combination with a solid
boron cantilver guarantee best pickup capability and sound
quality.
Specifications
Mounting: 1/2” centers / Threaded
inserts
Frequency Response: 20 - 47,000 Hz
Body: Aluminium
Channel
Separation: 27 dB (1 kHz)
Output Channel: Balance 1 dB (1 kHz)
Output
Voltage: 0.4 mV (1 kHz, 5 cm/sec)
Vertical Tracking Angle: 20
degrees
Tracking force, recommended: 1.8 to 2.2 g (standard 2.0 g)
Stylus
Shape: Microlinear
Stylus Size: 2.2 x 0.12 mil
Stylus Construction: Nude
rectangular shank
Cantilever: 0.28 mm Ø nude boron
Coil Impedance: 12 Ohms
(1 kHz)
Coil Inductance: 25 μH (1 kHz)
DC Resistance: 12 Ohms
Static
Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 16 x 10 – 6 cm / dyne
(100 Hz)
Terminal Pins: Brass
Wire Used for Coil: PCOCC (Copper by Ohno
Continuous Casting process)
Recommended Load Impedance: min 100
Ohms
Cartridge Weight: 8.2 g
Thorens TAS 1500 MC helipea
- Mudel: TAS 1500
Moving Coil Cartridge with boron cantilever and microlinear cut
With an
output voltage of 0.6mV (5.5cm/sec) and 12 ohms internal resistance, the pick-up
harmonises with all common phono preamplifiers. A naked diamond with microlinear
cut in combination with a solid boron cantilver guarantee best pickup capability
and sound quality.
The THORENS TAS 1500 is an MC pickup manufactured for
THORENS in Japan. The aim of the development was the optimal combination of the
pick-up in combination with the TD 1500 and TD 403 DD turntable and the TP 150
precision tonearm. With an output voltage of 0.6mV (5.5cm/sec) and 12 ohms
internal resistance, the pick-up harmonises with all common phono
pream-plifiers. A naked diamond with microlinear cut in combination with a solid
boron cantilver guarantee best pickup capability and sound
quality.
Specifications
Mounting: 1/2” centers / Threaded
inserts
Frequency Response: 20 - 47,000 Hz
Body: Aluminium
Channel
Separation: 27 dB (1 kHz)
Output Channel: Balance 1 dB (1 kHz)
Output
Voltage: 0.4 mV (1 kHz, 5 cm/sec)
Vertical Tracking Angle: 20
degrees
Tracking force, recommended: 1.8 to 2.2 g (standard 2.0 g)
Stylus
Shape: Microlinear
Stylus Size: 2.2 x 0.12 mil
Stylus Construction: Nude
rectangular shank
Cantilever: 0.28 mm Ø nude boron
Coil Impedance: 12 Ohms
(1 kHz)
Coil Inductance: 25 μH (1 kHz)
DC Resistance: 12 Ohms
Static
Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 16 x 10 – 6 cm / dyne
(100 Hz)
Terminal Pins: Brass
Wire Used for Coil: PCOCC (Copper by Ohno
Continuous Casting process)
Recommended Load Impedance: min 100
Ohms
Cartridge Weight: 8.2 g
- Kaubamärk: Thorens
- Saadavus: Toode on tellitav
The THORENS TAS 1500 is an MC pickup manufactured for THORENS in Japan.The aim
of the development was the optimal combination of the pick-up in combination
with the TD 1500 and TD 403 DD turntable and the TP 150 precision
tonearm.
Mounting: 1/2” centers / Threaded inserts
Frequency Response:
20 - 47,000 Hz
Body: Aluminium,Recommended Load Impedance: min 100 Ohms