Turntable section
Type Direct Drive
Motor Brush-less DC Motor
Rotation
Speeds 33-⅓ rpm, 45 rpm
Wow-and-Flutters 0.1%
S/N Ratio 67dB or higher
(A-weighted, 20kHz LPF)
Turntable (Platter)
Material Aluminium
Die-cast
Diameter 30cm
Tone-arm section
Type S-shaped,
Static-balanced
Effective Length 223mm
Needle Pressure Range 0g to
5.0g
Compatible Cartridge Weight 3.0g to 12.0g
14g to 23g (including
Head-shell)
Head-shell and Cartridge sections
Type MM-type (SUMIKO
Oyster factory installed)
Output Voltage 4.0mV (1kHz)
Needle Pressure 1.5
to 2.5g (appropriate value: 2.3g)
Weight 5.3g
Head-shell weight 11g
(including nuts, screws, and wires)
Compatible Stylus Styluses for SUMIKO
Oyster
Analog Outputs
Connector RCA Pin jack × 1 pair (PHONO/LINE
switchable)
Output Voltage
PHONO 4.0mV (1kHz)
LINE 224mV
(–13dBV)
USB Output
Connector USB B-type (DC 5V 100mA USB Bus power
required)
Audio Format PCM, 8k/11.025k/16k/22.5k/32k/44.1k/48kHz,
16bit
Operating Power AC 100 to 240V, 50/60Hz
Power Consumption
2W
Standby Power 0.5W or less
Overall Dimensions (W×H×D) 420 × 117 × 356
mm /
16.5" × 4.6" × 14.0"
Weight Approx. 6.1kg / 13.5 lbs.
Included
Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (SUMIKO Oyster
installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal,
AC Adapter (GPE036W-24015), Owner's Manual (including Warranty Card)
Teac TN-4D vinüülplaadimängija
- Mudel: TN-4D
Turntable section
Type Direct Drive
Motor Brush-less DC Motor
Rotation
Speeds 33-⅓ rpm, 45 rpm
Wow-and-Flutters 0.1%
S/N Ratio 67dB or higher
(A-weighted, 20kHz LPF)
Turntable (Platter)
Material Aluminium
Die-cast
Diameter 30cm
Tone-arm section
Type S-shaped,
Static-balanced
Effective Length 223mm
Needle Pressure Range 0g to
5.0g
Compatible Cartridge Weight 3.0g to 12.0g
14g to 23g (including
Head-shell)
Head-shell and Cartridge sections
Type MM-type (SUMIKO
Oyster factory installed)
Output Voltage 4.0mV (1kHz)
Needle Pressure 1.5
to 2.5g (appropriate value: 2.3g)
Weight 5.3g
Head-shell weight 11g
(including nuts, screws, and wires)
Compatible Stylus Styluses for SUMIKO
Oyster
Analog Outputs
Connector RCA Pin jack × 1 pair (PHONO/LINE
switchable)
Output Voltage
PHONO 4.0mV (1kHz)
LINE 224mV
(–13dBV)
USB Output
Connector USB B-type (DC 5V 100mA USB Bus power
required)
Audio Format PCM, 8k/11.025k/16k/22.5k/32k/44.1k/48kHz,
16bit
Operating Power AC 100 to 240V, 50/60Hz
Power Consumption
2W
Standby Power 0.5W or less
Overall Dimensions (W×H×D) 420 × 117 × 356
mm /
16.5" × 4.6" × 14.0"
Weight Approx. 6.1kg / 13.5 lbs.
Included
Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (SUMIKO Oyster
installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal,
AC Adapter (GPE036W-24015), Owner's Manual (including Warranty Card)
- Kaubamärk: Teac
- Saadavus: Laos
In collaboration with SAEC Corporation, a world-famous, high-end tonearm
manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing.
Pre-installed Oyster cartridge by
SUMIKO,2-speed drive offering 33-⅓ and 45 rpm
Crystal-locked speed stability,
thanks to a new brushless DC motor with feedback control
Built-in PHONO EQ
amplifier for high-quality sound (PHONO/LINE switchable)
Digital recording on
PC/Mac via USB digital audio output,Direct-drive analog turntable